Recent content by wkw

well all i can say is ...what i see on the receiver when it is set to slimiline 3s swm or slimiline 3s. But more important to me is to get it to work. When hooked up to swm it will not hold the signal on 101, on the 18 inch it works just fine, even if i have the receiver on slimiline 3 swm

the setting on the reciever for swm is difference than for slinilne 3s. yes the power supply is on. the pointing for the 18 in dish for 101 and the pointing for sliniline 3s for 101 is the same. but the swm is difference. but signal for satelite 101 is the problem with out it; i can not set...

both h20-600 do it and yes they are on slinline 3lbn and 3lbn swm the slinline 3lb is the same as the 18 in dish but the swm is different

went you tell it slimilne 3lbn az is 215 elev 50 tilt 63 but slimilne 3lbn swm the az266 elev 45 tilt 53 i can get odd transponder no even in about 20min you will have 0 on satelitte 101

can i use a 29v power supply on 3lbh swm

i have 2 h20 -600 went put on swm it show a difflerent az. elev.tilt i will buy a new power supplys thanks

i have h20-600. can get signal(97-100) on transponder 1 only .change lbn same thing can the power supply do this

ok i will go with 3lnb swm . can you use the meter on h-20 to set the dish? thanks all for help

H-20-600

ok i will go with 3lnb .now do i need the swm?

i have (2) hd20-600 with 18 in dish . thinking about going to hd with on local .will i need 3or5inb slimline or go with swm will a3inb pick up the new satellite ?my zip is 32321 can the swm be install use the receiver meter ? i know directv will install free