With setup in post #26, in order to receive All LNBF xponders (h/v), ASC1 has to be powered off, thereby NO LNB xponders. When ASC1 powered on, All LNB xponders come in. Manual like and a/b switch.... still hoping for a solution though...
Found a C/ku switch (after much searching) - DLS 400-2050 Mhz Model 719. Tried this fix. Picture on C band side.... NONE for Ku side. Also AZBOX Ultra has settings for 0/12v Switch and LNB Power on/off! AZBOX does not 13/18v etc settings that u mentioned. Any other suggestions welcomed. (C/Ku...
I have similar problem as in post # 15. I have Azbox Ultra (9.5402). I have C-Band 10 ft mesh with ADL (LNB). I just added fix dish (97W Ku) to setup and I have Invacom QPH-031. I have ASC1 set to normally Fixed 18v for C Band. This works well for C Band. When I add QPH-031 (LNBF), I lose all...
I have similar problem as in post # 15. I have Azbox Ultra (9.5402). I have C-Band 10 ft mesh with ADL (LNB). I just added fix dish (97W Ku) to setup and I have Invacom QPH-031. I have ASC1 set to normally Fixed 18v for C Band. This works well for C Band. When I add QPH-031 (LNBF), I lose all...
I have similar problem as in post # 15. I have Azbox Ultra (9.5402). I have C-Band 10 ft mesh with ADL (LNB). I just added fix dish (97W Ku) to setup and I have Invacom QPH-031. I have ASC1 set to normally Fixed 18v for C Band. This works well for C Band. When I add QPH-031 (LNBF), I lose all...
Use common door/window alarm switch. Mod sensor holder to hold door/window alarm switch and use glue gun to glue it in place.
PROBLEM SOLVED. I have same actuator with ASC1 and had similar problems. Also check censor wiring end to end for broken wire.
Condolences to Mike
Sincere condolences to Mike and family on your wife's passing. You have assisted us all the way down here in Bahamas. Thank you for your FTA site usage ...
Hi to all satellite guys...... this is the best site especially for BUD and FTA a wealth of technical details and knowledge.... is there a compiled handbook of all of the problems/solutions .......