Search results for query: *

Nodes are water tight, no additional protection needed. They are made to be mounted outside and grounded

If you don't care about HD you can use one dish for 110, 119, 118.7. You'll get all the programming but no HD

Third hopper has to be completely isolated from the other 2 including the Internet network. If not it will crash the whole thing. The system is not designed to support 3 hoppers. I know this for a fact, I tried it.

If you cant get any higher than 30s on any 119 transponder and you are sure your mast is level I suspect a line of sight issue. 119 sits lower in the sky than 110. You should get 70s on 119 transponder 10

You can also set this thru the menu, settings, remote

Wont work. I've tried, won't even work from a 922 to hopper

You can back up the recover settings and timers to the 40.0 remote only

No you can't rip DVDs to the hopper. There are ways to stream media to it though with dlna. To see the latest software version press menu twice on the remote while watching tv

Actually you can keep one hopper isolated from the rest of the system with 2 isolators. They look like splitters or diplexers. Very easy to do

The splitter trick should work, sometimes the fuzzy picture is because of the splitters being hooked up incorrectly. They have to be turned the right direction. The one at the box should be set up so home dist goes in an out port and the ant feed also onto an out. On the tv2 splitter make...

Correct you will have to program all the remotes to there respective tvs just a you would with the 922 from the menu. You can do this after seeing live tv at each location

Yeah basically do each hopper one after the other and then activate everything. Then only after seeing live tv on both hoppers start installing the joeys one at a time

Well it's not advertised as 6 tuners during ptat, it's advertised that you can record up to six shows at once during ptat. I think you understand basically how it works. Ptat uses one tuner and pulls the local network feeds from one sat all at the same time. So yes if you need more than 3...

Yes it should be the same as a 21.0 or 32.0 remote

Call the 800 number they will contact dispatch for your area

Wa is available in va to cust wanting sd equipment DPP twin 500

44 switch can be used but the power inserter has to be moved. Can be a pain.....he's def wrong about the node though

What the installer needs is a 500plus dish with a DPP 500 plus lnbf with 129 bracket attached and fed into the input port on he lnbf. 2 lines to the node, done deal

All you need is a dish with a built in switch and 2 lines down to he single node.

Nonsense. Only reason for a duo node is two hoppers. I am a DNS tech

A properly installed mast has 2- 3" lags in the middle holes going into the roof truss under the sheathing. The struts are also a good idea. I am installer BTW.

You can do this and it will work fine as long as you make sure you hook up the 211 sat line into the separator or triplexer on the 722

Actually this can be done if you do t care about hd. In the modulator settings in the menu you can turn on tv1 and it will come out the home distribution/ tv2 coax port. Both tv1 and tv2 ch will then come out the same port just on diff channel. For example if tv2 was set to 60 then tv1 would...

Yes you can. To put it simply its just a way of allowing you to use a single cable into the house vs two or three for one box.

The remote access app will work with the 922k and 722 with adapter