Search results for query: *

Was unable to find anything in menu box to get rid of pop-up(unless I missed it).If anyone knows how please provide details.

I set my kbox stb on 97w using a/v wiring instead of coax.But for some reason screen on TV keeps displaying 'Notice:No Audio/Video'. Is there a way to get rid of that notice? I need to press the exit button on the remote inorder to remove it as it pops right back after 30 seconds or so.

Im using a universal LNB and here are my settings on the birdog.I just changed the BER from Linear to LOG.The RF setting is set to Linear instead of DBuv.Is there a setting I need to change since im using a universal LNB instead of a standard? I will try aiming again later using these new...

I recently purchased a 'BirDog' sat finder and put to the test yesturday but did not have sucess. I was able to update the birdog with a new file of sats but was unable to find 97W using it. Here's how I tried using it: -I aimed for 97 west uding my stb able to get 80 quality. -I then removed...

Well I already made the purchase a few days ago but Im taking it from your comments now that the 22khz switch will not work with the dpp44 switch and dishnetwork reciever and only works with fta equipment? If so, then is there not a way to connect my fta dish and provider dish together using...

I was doing some reading in the forum about switches and it states that a 22khz switch will not work with a universal LNB.Since I am using a universal LNB on my dish, Im guessing this will not work and I will need to install a standard linear LNB instead? Here is the diagram.

Im currently trying to figure this out just like you and someone suggested the following: "Get an Ecoda 22KHz switch(es), connect output from DPP44 to 0KHz side and other cable from the new 97 to the 22KHz side then out to your receiver. You must enable or turn on 22KHz tone for Sat 97 on your...

LOL Not at all man its just I lost track of one of my threads as I forgot to subscribe to it.But thanks to Iceberg its been found.Would be nice if threads can be automaticallly saved when the OP starts a thread but hey no complaints here just a suggestion to the forum we all love.

:shocked wow no replies yet. Where are the experts hiding out today?:cool:

Looking to hook up sub VIP222k. Currently have following set-up on roof: 2 direct tv dishes with 3 legacy lnb's(110/119 and 118) going to 4x1 disqec switch. 1)is the VIP222 compatibile with both legacy lnb's and the 4x1 disecq switch? 2)If not compatible with disqec switch can it be replaced...

Looking to hook up sub VIP222k. Currently have following set-up on roof: 2 direct tv dishes with 3 legacy lnb's(110/119 and 118) going to 4x1 disqec switch. 1)is the VIP222 compatibile with both legacy lnb's and the 4x1 disecq switch? 2)If not compatible with disqec switch can it be replaced...

Can I combine a sw21 switch near the DP34 inorder to have only 1 cable go to the reciever and use a seperator on the 2 tuners or will that not work?

Here's an update on what I did today. -After installation,moved dish from garage to yard.Also set the tv and reciever outside as well to make it easier finding 97W. -I set the lat/long using Usals(lat=33N,long=97W),pressed 'go to sat'on stb but for some reason the motor kept rotating west...

I believe I have the orginal motor since it has 1 button.When I press the button it only goes west for some reason as I want it to go east since it passed the 80 mark of the west side. I can also press the reset button using a pin to reset the stb settings but just curious to see if there was a...

Do DPP33 and DPP44 need a power inserter as well?

I would like to install a dish 500+ or 1000+(110/119/118.7) using a dishnetwork Duo 222k reciever. I would like to know which DP switch to use for this DPP set-up.From what I read, a DPP33 does not work with DPP LNB's which I think this set-up is ? But then I was told by others that this set-up...

Just curious, when you say press both east and west buttons are you referring to the buttons on the remote control or are there buttons on the motor itself that maybe I did not recognize yet?

Today I put together my motorized dish using a nfusion nova stb.The motor was set to the '0' position.I entered the installation section on kbox menu and selected motor.I started moving motor east to west.I then selected center position on menu and it started moving all the way west and kept...

I purchased these from an individual not a supplier as he had some parts missing.Is there not a way to measure exactly where the LNB should be plaved on the arm?Will the birddog finder I have help in this case?

Thanks for the responses guys. I will try attaching the dish using this project and if doesnt woprk will go ahead and purchase a tripod . It seems like I dont have an LNB holder.Is it possible that I insert a 3 inch bolt inside the hole towards the end of the LNB holder arm and hold the LNB...

I have 2 recievers I can use.A kbox prodigy which is what most suggest to use and a nfusion nova.

I am looking to aim 97W with a motorized 30'' fortec dish using a universal LNB.The dish would be in my yard.I attached the dish on a wooden platform (pic below).But as you can see in the pic not sure if using a motor will work with the dish attached on the ground since the arm of the dish is...

Well, I'd like to set it up at my bro's home for big events.So I don't think dish will come out to his house and set it up free right? Now someone did suggest to tell dish im moving to that location so that means free install but I don't want to take the risk of them uninstalling the dish at my...

Programming I need is 110/119/118.7.My local area is dallas/forthworth. I now understand I will need dish 500+ LNB's but is one of the pics I posted above a 500+LNB?If so which one? And if not can you post a pic of what exactly is a 500+lnb?

Im assuming this is the LNB your referring to Iceberg? Can I use this one as well for 118.7?