Search results for query: *

The other thing I note's is that only few channels and some times only one on a specific sat will make the dish move to another sat why is that.

Also the first satellite to scan and save would be the closet to my true south correct

OK so I scan and save. Do I delete my current channels that I have scanned then or will the receiver up date it self once the new scan is complete.

I changed the LNB TYPE TO universal/10600 I ended up loosing signal for some channels Then I tried Standard /10750 and the same problem.Now I just left it as it is. but to solve this problem do I have to delete all channels and then rescan!

First thank you all for helpful information and Just an update I have tried to store a forth satellite the 103w following the same approach with no success! Nothing printed on the LNB, Universal or standard.Is that mean it's standard! What I have on the Antenna setup is LNB Power - ON TYPE-...

OK some good news I decided to go with factory default and start over. I have been able to store up to three satellite using the USER option in Motor. That is were I had to manually change the dish then I want into user stored position and exited. I stored position again by pressing F3 when I...

LNB Power - ON TYPE- universal High -10750 Low-9750 Search option on Diseqc 1.0 Motor -usals As for LNB RF 11.70/12.20GHZ IF 950/1450MHZ LO 1075GHZ Cain 55db Lastly if I use USALS to move the dish I can hear the click sound from motor but it does not move. As for DisEQC Switch I'm not using any.

One other thing with Standard I only have LNB FREQ and 22KHZ as options,With Universal I have High and Low.

If I select standard for for the LNB there is no pic/sound. If I select Universal there is pic/sound. So is that mean the LNB universal? I have also changed High 10750/Low 9750 Motor is H-H Sc-2100 Using USALS still shows this message antenna moving but it is not moving! I had manually moved...

I have tried to use the USALS option and the dish moved from 97w to 101w and that was great. However,now I can't get the dish to move back to 97w or any other satellite using the USAlS. the following is my setting. LNB TYPE Universal LNB High 10600 LNB LOW 9750 MOTOR USALS Also in the Usals...

under my antenna setup I have Diseqc 1.0 None Motor User Thank you

I have 36" KU Motorized dish With Viewsat xtreme I'm able to get signals for several satellite but each time I move the satellite from one signal to another I'm not able to get the previous signal. I do believe I'm storing each position after each blind search I do,but nothing seem to be saved...