Search results for query: *

Yes sorry no joey so recommended to put the 75ohm plug on its output. For some reason I always get the kangaroo thing mixed up! they should have called the hopper a Jill.

yes i meant client output. I just read that a 75ohm terminator required if no hopper is hooked up.

I got it figured out now...thanks. plus need to put a 75 ohm load on the hopper output if not being hooked up.

Duh SA WA! thanks everyone for the pro advice....I am convinced my prob is due to the lack of the solo node as even on the winegard rv antenna site they make a big post note that it is mandatory to install a solo node if using a single hopper system. The only thing i havent quite figured out...

so then I guess that explains why when i do a check switch tuner 3 dosent work and i get an error!!! orginally I had a radio shack dude help me align as I didnt have a meter and I asked and he said thats the way it is supposed to be!! so i didnt give any further thought... so is there a...

whats EA? I will have to see what lnb pack etc I have..I was told it is the 1000.2 but will double check.

well..i adjusted my skew back to the recommended setting for my lat long and 119 is identified on the recvr signal meter now...all 3 sats come in with good signal on the meter. hmm have to see what happens tonite. thanks for input. I ran my old hopper for 2 mos straight this summer in my rv...

It says status=good in box a however in box g it only has a red box under 119 and 110, 129 and x are blank ps: I dont have a multiswitch or node on the rv...it is direct from antenna to the recvr.

I just checked my signal strength on the receiver and it is picking up 129 on 119. But it wasnt the other day when I installed my new hopper and ran check switch. Maybe I should re-aim my dish? The only thing I did after I dialed in 119 was to adjust the skew past the specified degrees to...

I have a real head scratcher here...:( I had a hopper and 1000.2 dish set up at my house in southern oregon. Signal on recvr was in 50's which is normal in this area. About 2 mos ago I would start getting signal problems after dark...most channels other than the network spots would lose signal...

further to this I called my local sat company and they dont have any customers with night time outages. However I am thinking that software could know the diff between night and day as there is an internal clock. I could swap out receivers but that is last resort. I wonder if there is any way to...

One problem solved and now a worse one....! :confused:Well thanks for info...the re-hit did nothing as you say but it did bring back the military channel which all of a sudden disappeared the other day. I got my hands on a birddog and at last resort decided to move the dish a few feet to the...

weird thing is last night all channels went out and sat search screen came up and was looking for ie 129 then it switched to 118 and then x I messed with the channel selector and finally got a channel and then I could get them all again... now it is in the am and all channels back up but 110 on...

I tried the whole range of skew and nothing....plus elevation/azimuth until i lost 119. I will get a birddog tomorrow and verify that i am getting signal on 110 and then go from there... ?thanks

I am scratching my head! I just put my dishnet dvr receiver in my motorhome. Prior to that it was at home and at night I was getting HD signal errors on some channels and then it would switch to SD sometimes. I put in my motorhome and set up 1000.2 dish on tripod and all worked fine for one...