Search results for query: *

Thank you for the very detailed review!

I currently have a couple Edision receivers, OS Mio 4k and OS Mio 4k +. I have no complaints about these; I am happy with them. My experience with them has been positive in the few years I've been in the FTA hobby. I do a lot of blind scanning and these receivers seem to do a good job at...

I have two Edision OS mios, one on the wife and kid's tv, and one on my tv. Both are on the local network. Just out of curiosity, is it possible to stream from one box to the other? Has anyone ever attempted this?

Look for a Digiwave DGL-990D. I have one of these on an old slimline dish. It fits in the support arm, but is slightly narrower than the arm east to west. It does however line up correctly without having to modify any brackets or anything; just clamp it in like the DirecTV one was. It is a...

The box arrived at my office this last week. Thanks again, Brian!

This is very generous, what you are doing in this thread and the other, Brian. I was a little late and missed out on things I knew I would use from the other thread. Since I am constantly tinkering and dreaming up new things to try with this hobby as well as have a couple friends and family...

I want to win an Edision OS Mio 4k with TNAP image. My Geosatpro 90 on the horizon to horizon motor and the old Slimline looking at looking at 118.8 W for the CNN feed. Thanks for doing the contest Brian, and good luck to everyone!

OK, I finally had a little bit of time off work here. I've read through all the comments and got my boxes working for now by deleting the weather plugin and switching skins. I want to send a big thank you out to everyone that contributed to figuring out the answer to this. THANK YOU!

OK so I got to the boot menu and tried to boot into the other slot with the older TNAP image. It let me do that, and it appeared to work for about 10-15 seconds and then started the same problem again. I believe this may be because that image was using the same skin. So is there a way I can...

Thanks, I will try to do this in the morning. I have an earlier TNAP image in a different slot. Hopefully, I can make it work. The wife is sleeping now, so she will not appreciate if I start turning things on in the bedroom at this hour. Yes, I believe that GlamourAuraFHD is the skin I was...

I have an OS Mio 4k+ currently using TNAP 4.0 I fell asleep watching TV last night and woke up early this morning to a green screen. The screen reads We are really sorry. Your STB encountered a software problem and needs to be restarted. Please send the logfile/tmp/enigma2_crash.log to the...

Welcome Leever2000 You will find lots of helpful people here. I know they've taught me a lot in the couple years that I've been into FTA. Whether you end up with a C band setup, Ku band setup or both you'll find a whole new world of programming that you probably never knew existed.

The amount slightly higher and slightly lower is going to depend on where on the map you are located. And I guess I gave those directions based on the assumption that you were somewhere not too far from me. I think if you are in the Eastern 2/3 of the county it should still be accurate, but...

If you are trying to get 116.9, 113, and 103, I would suggest trying to get your center lnbf locked on to 113W. Then put your 103W lnbf to the west of it and slightly lower. And put your 116.9W lnbf to the east of the center and slightly higher. I have a dish setup with three lnbf's (87W 99W...

If you have the Dreambox Edit program, see my post #24. Once I learned how to do it, I found that it works very well.

A big THANK YOU to everyone for the suggestions, ideas, and guidance. We are currently tuned in even better than we were before the wind storms. I'm sure there is still some room for improvement, but I've had enough for today. We'll leave everything tightened down where it is at now for the...

Thank you so much! That puts an actual picture on paper to what I was seeing in my mind. Now, hopefully I have enough time to get this taken care of tomorrow before the expected winter weather arrives.

Thanks for all the input so far. So I had a little time to go out and work on this some this afternoon before going to the Thanksgiving get together that was cancelled last week and then all of the sudden uncancelled today. First, I checked the coordinates entered in the receiver and verified...

That was my thought. I believe my plan is gong to be to read through Michael's guide and the manual for the hh-90 to make sure I have all my numbers figured out correctly and entered into the receiver correctly. Then go outside in the daylight and make sure my elevation is set as close to...

Thank you. I just printed it out so I can read through tonight and figure and re-check and triple check all my numbers.

So we had a couple of pretty windy (50-60 mph) days here recently, and I suspected it may have moved my dish ever so slightly. I was not getting the transponders on 65W with as good a signal as I had in the past (I had never been able to get any signals east of here, I assumed because of trees...

Being that it is Thanksgiving here, I just wanted to take a moment to say thanks again to all those who post here, especially in the FTA threads. All the knowledge and sharing of information is greatly valued!

If that were closer to me I would bring it home. Then my wife would see it, and I would likely end up living in it. She doesn't always see the same value as I do in things.

FWIW, I recently acquired a 950Q and have it on my OS Mio 4K. In the limited amount I've been able to use it, it seems to tune the OTA channels just as good as any of the TVs that I have. I am pleased with the purchase.

I tried something after getting an idea while I was adding some more IP channels to my box. It is not TV, but may be of interest to some. I managed to add audio feeds from my local law enforcement, fire, EMS, etc. I found the stream urls on broadcastify and entered them through dreambox...