Search results for query: *

Update. I decided to go the long route and start with the dish deliberately pointed further west then it should. I then went through the process of changing the azimuth ever so slightly towards the east and running check switch until I finally received a signal for the 61.5 sat and it had moved...

Update. I pulled the antenna off the mast and changed it to the numbers from dishpointer.com.while the antenna was off the mast I corrected it to be level, it was off a small amount. I pointed the antenna to the general direction shown on the dishpointer.com web site. I rotated the antenna very...

Is it suggested to power cycle the Hopper3 receiver after every adjustment or is doing a check installation OK? I’m retired and love the challenge of tuning the antenna knowing I only need to do this twice a year. Better still would be using a meter. Any suggestions on a meter for the hybrid setup?

I will do that in the morning when I have some daylight. I’ll report back with the results.

*************** I use the chart provided by Dish. I’m at zip code 342## and have the antenna set to 55,67,156. In the check switch readout sat 61.5 shows as locked with a signal strength of 70, the second node displays “conn”. I’m not getting all of my subscribed channels which is expected since...

Just moved to my Florida location for the winter and I’m trying set the antenna for the eastern arc. I have the 2 LNB-Hybrid setup (Hopper 3) and have no problem with sat 61.5 but all I get for sat 72 is “conn”. Signal strength on 61.5 is 70 and I read in these forums about possibly adjusting...