Search results for query: *

I believe the multiswitch in the Slimline and AT9 will share some of the operating current between several receivers. In theory, if you have an operating receiver connected to at least one LNB port it should lessen the current required from a Birdog. I have not personally tested this so its just...

The current Ka/Ku download for the Birdog programs it for 13v on the 101 and 119 slot but the Birdog will put out 13v, 18v with or without 22khz tone depending on programming. I think the Birdog people have the 110 download programming wrong.

I was told there are reasons why you don’t want to peak on the 99 or 103Ka birds. Something about an error depending on where you are in the country and peaking at 101 minimizes the error. What’s wrong with the current method and using an affordable meter? Bob

Never had to adjust the screw on an AT9? You mean you don’t peak the antenna by balancing the left and right wobble adjustment? Bob

That’s not just a trick but also the basic instructions that come with the AT9. You should never loose 101 from adjusting the skew unless you loosen the bolts so much that the dish droops. I’ve done a bunch and 101 stays very stable as you rotate the skew or tilt. Bob

There is a separate manual for the various flavors of 5-LNB dishes but the WNC seems to be the cleanest copy that is being passed around. If you don’t have a WNC dish this manual will not address minor LNB and cable specifics but it does have the latest alignment instructions for the mount with...

Found one.:hatsoff: Bob

Why do people still post that old incorrect AT9 manual that Solidsignal refuses to update? The current version has been posted here before and should be easy to find. Look for the one without the obvious “preliminary” banner across the front. Bob

Swap out the circular Directv LNB on your 95 dish to a standard Ku single linear pol model. You want horizontal pol. Bob

I don’t know the correct answer to this one as I’m not a licensed electrician and this extreme distance has not come up on one of my jobs yet. But I can say if it were my house and it required 225ft, I would use RG-11 to cut down on the signal loss and place a ground block within 20ft of the...

Grounding the dish is for electrical safety, not lightning protection. Preventing damage from lightning is way beyond what the average person can ever accomplish. It would also cost more than the dish install, your entire home entertainment center and possibly your car. Do what others have said...

Have you tried it in the pass through mode where the receiver is powering the dish? Bob

The Ka/Ku dish is not compatible with other types of LNBs, don’t plug anything into the 110/119 ports of the main LNB head except the specific LNBs that come with the dish. Someone mentioned using a second Ka/Ku of the same type just for 110/119 and there is no reason that should not work. Bob

Where did you see it and what is different? Are you saying it has changes and is better or it needs changes? Bob

I’m talking 1hr constant on time. If you run it 5min each AT9 and less for basics you could do a week. Bob

Still sounds something is wrong. The Birdog has a 1-year warranty, maybe you should contact them and describe the problems. Bob

Do you have “BER” turned on instead of “FOUND”? This will slow the meter down in recognizing a transponder. How about Log vs Linear? This will show a big difference between modes, otherwise most Birdogs read similar. There is no user calibration on the Birdog that I know of. The “software” is...

I’ve mounted AT9s to thick solid concrete without mono poles and the supplied mast is ok. Not great, but ok. The smaller 1 5/8”mast is not a good idea and you would definitely need additional bracing or mono poles. Bob

I believe this is what you are looking for: http://www.sbcatest.com/nstptestdate.htm Bob

The Dell in question is aW4200 and boasts of 1080i resolution. I still need to see the comparison for myself, but please tell me why D* HD seems to look better than E* HD, even if the monitor supposedly doesn’t display the ultimate quality. And another thing, Both D* and E* compress the HD and...

Have you tried this or is it speculation? The Ka is frequency stacked with 101 Ku, how is the 4X8 going to strip out the 250-750mhz signals? Is there some filtering in there? Bob

Silly or not it will address the man’s problem of HD locals clogging the OTA frequencies. If you simply diplex OTA there may still be residual Ka transponders that the diplexer cannot filter out. Some diplexers are better than others. Got a better idea? Bob

Actually I have. Need to know what’s in there? Bob

Over the feed horn openings for the 99 and 103 Ka satellites. The man wanted to eliminate the Ka signals from clogging his diplexed OTA so if you cover the little feed openings for Ka only it will leave you with a mild noise floor in the UHF off air TV band which the diplexer should take care...

Grydlok, Wtf on your wtf? Hoss, You could use aluminum foil but you would need something to stick it down without damaging the radome. Bob