Search results for query: *

Try the following: 1. av1 or av2 2. press and hold MUTE & SELECT for two blinks, release 3. enter 2 0 4 9 0 to get the volume: 1. av1 or av2 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 9 9 3 4. press SELECT

The code you need is 32609, but it isn't preset into ANY directv remote, especially the rc71, which has no audio codes at all. It has to be sent to remote by the receiver.

Try the following: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1 If it controls your HR44, the remote was NEVER in RF mode to begin with. Remember the Hr44 accepts both IR & RF at the same time, RF from Rc71, and IR from any Directv remote set to...

The rc66RBX will not control the hR44 in RF mode, don't waste your money.

Many keys on the rc65 remote are strictly for directv receivers, like the color keys. Press each key under the av1 or av2 device, if the light above the directv device goes on, that is a key only available to directv receivers no matter what dvd or blu-ray code is used. So you may not need a new...

Program av1 or av2 device with default IR code 00001: 1. av1 or av2 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1 Now enter the menu of the second receiver and switch like you did the first.

For directions, see this thread: http://www.avsforum.com/t/1458474/setting-up-multiple-directv-receivers-on-harmony-1100-in-same-room#post_22971599

The color keys on Directv remotes are strictly for directv receivers, no non-directv code in the remote has the color keys mapped, sorry.

If you read the description of the backlit remote, you see it's of the older type of remote, just has the wrong photo. There is no backlit rc71.

Sure, couple of ways to put it back into IR mode, easiest is to just program 00001 to the directv device: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1

If the H10 remote is RF mode, use your H24 remote to put the receiver into RF mode as well, through the receiver menu, once receiver no longer responds to the H24 remote, do the following on the H10 remote: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1...

After a 981 reset the directv device is programmed with code 00001 already. If still doesn't respond, than the receiver might be in rf mode: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 9 6 1 4. press CH UP 5. enter last 6 digits of Receiver ID #(RID), found on...

What?

Ask here: http://www.hifi-remote.com/forums/index.php?sid=8698080b21c65e0cf1db8b137c31b932

To control the HR44 by IR, the code in the RCA remote is 1377.

Unlike your rc66, which has preprogrammed codes, the rc71 has very little tv codes and No audio codes preset. It relies on the HR44 to put the right code into your remote, a code that wasn't present in your remote before. And when programming the rc71, you do not use MUTE & SELECT, its MUTE &...

Even if the HR44 responded to the old RF remotes, you didn't have RF remote, the rc65x is IR only.

If the hr44 is like other two directv receivers that accept both RF & IR at the same time,( the R15/R16 & the THR22 Dtivo), if you turn on the RF through the menu its RF only. You have to leave it in IR mode, just put the remote into RF mode, than it accepts both RF & IR. I do not have hr44 either.

Sorry, but the tivo peanut included with the THR22 hdvr, does work with hr20 and subsequent models of directv branded receivers and dvrs. Using both RF and IR. You can't say the same for original Directv Dtivo remotes, nor SA tivo remotes. Of course it won't control the HR44 Genie via RF, but...

http://www.avsforum.com/t/1479178/direct-tv-hd-dvr34-gennie

A standard tivo remote willl not control the HR34 or THR22, or any Directv receiver currently available. Sorry. If you want tivo peanut to control the HR34, you need to purchase real THR22 peanut from Directv.com. Under remotes look for RF tivo remote for sale.

The rc71 is the oem remote for the HR44, not the HR34. It will control the Hr34 by IR, but not RF, since the HR44 now uses a new RF frequency. If the rc65rx doesn't control your hr34 using IR codes 00001 through 00008. Then the HR34 is in RF mode, tr the following: 1. dtv 2. press and hold...

If the RF remote isn't backlit, you could take them apart and switch key membrane between them? Its rubber that loses conductivity.

A failed codesearch is proof positive there isn't a code to find, and so can move on to aftermarket solution.

I have never heard of anyone finding a working code for this brand, I suggest doing a codesearch by volume, with tv on, volume up but muted: 1. tv 2. press and hold MUTE & SELECT for two blinks 3. enter 9 9 1, wait two blinks 4. enter 1 5. press and release VOL UP 6. point the remote at the tv...