Search results for query: *

Thanks, I tried again today but no luck. I attempted to get 63w I connected KU Lnb directly to Stb but nothing. I will try to get a DBS and attempt 61.5w. I just don't what the problem could be.

Thanks Ice but I don't have a DBS Lnb but I have a standard Ku Lnb. I was going to attach and try for 63w later today due to it being about 100 degrees outside right now.

My settings are correct. I have Lnb connected to Diseqc switch port to stb.

I live right on the border but for the past 4 days I have been trying to get 58w but no luck. I am using a ULN1 Lnb like I mentioned but nothing I tried different transponders(11612,11960,11980) I moved setup two times to get clear line of sight but still no quality only 90 strength. I skewed...

I am using a universal Lnb (uln1).

Thanks Ice,I will try that; I had tried measuring 0 to -30 then -30 to -60 and set about -51 but got no quality just 76 strength. Maybe, that my not be possible but I will try it alittle past -30.

I am trying to get 58w on a stationary 36" dish with uln1 Lnb. the dish setting ask for a -51 skew but Lnb shows marking to -30 only. How do I get to -51.

Connect it to a diseqc port by itself right.

I have a universal because I am trying to locate mexican satellites and some require universal Lnbs.

Thanks again, will the universal lnb be connected on the off or the on side of the switch and in the Stb setup can I use port 4-sw22 on/ port 4-sw22 off to separate lnbs. I know the photo shows it on port 1.

Thanks Iceberg, so I will need Ecoda 22 Khz. switch.

"I want to win" I want to finally remove my two dish, three Lnb setup. I want to get my wife of my back for be on the roof on and off for a week trying to get a signal.

I want to use the same setup as gmd63 but can a sw21 be used instead of ecoda 22khz.

Sorry, receiver =diseqc switch=port 1 & port 2 connect two DBS Lnbs=port 3 connect to DBS Lnb=port 4 to motor w/KUL1 Lnb. I want to add ULN1 Lnb to motor. Can I use a sw-21 or sw-22 to connect Kul1 & UNL1 then to motor then back to port 4. I live in South Texas and I attempting to get Mexican...

anole, this my set-up

I need to connect two KU LNBs-one standard and one universal to a motor and then to a diseqc switch port. I am using the other three ports. Do I use a sw21 or a sw44 switch to connect both KU LNBs. Will mount together on a 36" dish.

Yes, I am motorized I will save the tread. Thanks.

I have a 36" fortec and a kul-1 standard Lnb but I want to add a universal to try and get mexican satellites. Is this possible and if so do I just put side by side or do I have to off-set. I have read several threads but this issue is unclear. mainly attempting 58w.

Thanks again that was quick. I appreciate your help.

Thanks, I will do that. Once I do that, do I go to satellite set-up get another satellite and the motor should move it to that satellite.

Thanks, I will try that but how do I set 97w to zero.

I have a sv1000 and my Lat. is 27.5 N and 99.4W, so my south satellite is 99W(G16). I set up elevation to 27 and set dish bracket to 25 as noted on sg2100 (dxm-7000/42) manual. I am able to lockon to 97W but can't get 99W. I tried using the motor and then usals, but still no 99W. I even had...

Thanks for your reply, I have a Sonicview 1000. I do skew the lnb as mention for each satellite but still no Quality. I will probably end up getting a Motor but want to lock into a satellite till then. Do Ku satellites displayed on upright corner of display screen on TV when locked in because...

I live in Long.99w. I have the elevation,compass readings of the satellites in my area. I have been trying to find G10r again and satmex5, I set receiver to mentioned sat. frq.,and transponders as I have read in forum but still no quality. I have a fixed 36" fortec with kul-1 lnb and been...

I have an sv1000 receiver. I am having trouble picking-up any satellites. kul1 is LNB setting as single and do I have to set Freq. to 10750. I only picked up 123w and 97w but I know there are more out there.