On my vs2000 ounce you change from universal to standard all you have is frequency Lo is not an option.(This is in auto)
I can enter all this info in manual mode but the result is the same.
auto-failed noCH
Galaxy 3 is supposed to be my true south
I have scanned by-passing the motor also turning the motor off.
One of the thread said that coolsat LNB is stsndard I've scanned both standard & universal with the same result auto failed.
I think this is a receiver compatibity issue. I re-scanned with the same result.
It could be that there is some info that needs to be manually re-entered.
After a bunch of hours I am stumped.
Just had another idea to try to see any channel I bypassed the motor/rotor went straight to the lnb...
I have went and got the in-line meter it is showing good signal after fine tuning the signal with the meter signal stregnth is 90.
My problem still exists no channels.
I have an old bb4 receiver that has signal & quality meter but I hooked it up and Galaxy3 is not in its sat list. there is a GE3 @ 87degrees & telestar 5K @ 97degrees I thought 97 is where galaxy3 was on my vs2000
First Time- Yes
Strength Meter-no
I have tried auto & manuel searches
I am scanning Galaxy 3c 97 degrees w
67330 Latitude 37 degrees
Mounting Pole I will double check (ok)
This is all new equipment from FTA Direct
coolsat
my lnb is coolsat
RF:11.70/12.20GHZ
IF:950/1450MHZ
GAIN:60db
NoiseFigure:0.6db
I changed from universal to standard but still dont pick anything up.
I have a vs2000 receiver and a hh90 rotor on my dish. I get a signal of 70 but when I search it picks up nothing.
LNB POWER-on
LNB TYPE-universal
Lnb FREQUENCY-11749
HIGH-5150 (changedto get signal)
LOW-11475
DISEQC-none
SEARCH OPTION-all
MOTOR-user
When search is done it says auto...
I just receive my new system and need to confirm confirm settings on the installtion menu on the receiver are correct (lnb type, lnb frequency.. etc)
VS2000, Fortec Star, with coolsat ku band LNBF Zip 67330
what do I do now
I just receive my new system and need to confirm confirm settings on the installtion menu on the receiver are correct (lnb type, lnb frequency.. etc)
VS2000, Fortec Star, with coolsat ku band LNBF Zip 67330