Search results for query: *

Maybe I am wrong or not skilled enough with the big dish but I feel that there is getting less and less to watch on C-band. Since I don't speak Spanish they are of no value to me. I love the ARROW program and I guess that will disappear also:(

Thanks Mike for replying. I'm afraid I didn't get anywhere following your instructions. Galaxy 19 has about 6 strong transponders and I could not find the CW on any of them. Your Instructions 97W V? or H? 4100 h 29860. The linkbox did not have anything programmed for Galaxy 89w H? 3880 V...

Anik f1. Stats: 10ft mesh, titanium positioner, linkbox I am having a lot of trouble with a lot of birds. Guess they must be moving everything for the fall season. EX: Anik f1 no longer has any "CW" on it. Where can I find the CW now?????? I am on the east coast and can get 55.5w to 125w. Will...

Had "Grit" on AMC 9. It has disappeared again. Does anyone know where???????

Thanks BigRyan for responding. So you position the dish to where you want to scan and then add the "Test C Band" to the Antenna Screen or Search Screen (talking LinkBox jargon). This should give a list of everything at that location. Have I read you correctly??

Thank you Brian. The problem is now fixed. As you directed I added 4145 H 4150 to AMC9 W. Last time I looked I had Grit at number 1 and it was coming in badly. For some reason I went down the rest of the list and found another Grit. The Linkbox had a Grit on 4143 H 4150 messing things up. I...

Thanks all for your help and suggestions. I added the transponder 4145 H 4150 on AMC9 (83w) as directed by Titanium. I get about 30 channels with a decent signal level on AMC9. Grit however is flaky. It sometimes shows "No Signal" or "Freezes" or gets streaks through it. I have tried the buttons...

Remembered the name of the dish. It was the Paraclipse. Could not update my previous post......

You lucky dog :). I had one of those 12 footers many years ago. You should be able to pull in PLuto with it. I used 1 yard of concrete to set my pole because of the weight of the dish. The weight is also hard on the actuator. I made a big mistake taking mine down and and taking it to the...

I set it to scan for "ALL". Nothing shows on 3940 H 30000. Grit is also on AMC9 supposedly in the clear and there is no signal there either. Must only work at night I guess.

2-28-2017 Stats: Linkbox 9000i iptvhd Titanium Asc1 Titanium LNBF Geosatpro switch sat range on the east coast of Florida is from Galaxy 14 125 degrees to Intelsat 21 58 degrees This is a question I have about transponders. Example: Galaxy19...

2-28-2017 Stats: Linkbox 9000i iptvhd Titanium Asc1 Titanium LNBF Geosatpro switch 10' mesh dish sat range on the east coast of Florida is from Galaxy 14 125 degrees to Intelsat 21 58 degrees I don't know how to keep theses Google adds out...

Thank you Catamount for responding. Clears it up for me.

The wiring for this diseqc switch was set when I bought the Titanium Asc1 and up to recently the settings I used seemed to be working fine. I have not touched the wiring since then. C-band has been working on many other sats from Intelsat21 to Galaxy23. The Diseqc1.0 is set to port1/port2 and...

Thank you Brian, I will try to do what you suggest. I have attached a picture of the settings I use for each C band satellite. Diseqc1.0 for C band is set to port 1. Diseqc1.0 for KU is set to port 2. Diseqc1.1 is always disabled. This differs from your previous message and I don't know if it...

The Linkbox upgrade just made it worse. I have several problems: 1. After all this time I just found out that I should be going to the next screen on the Titanium Asc1 and saving what I entered:eeek. 2. Say I am at Eutelsat 113W and have just programmed it. When I try to look at what I have...

Progress: Did a factory reset and that worked. Down loaded upgrade from Linkbox (had to use WinRar) and it worked. What's wrong with 7-zip? In the process of reprogramming all the sats. Have no idea how that will go.....

Thank you for responding Armadillo. The receiver is not on the radio list. I will do another factory reset. Last time I was on the Linkbox web site my Virus program stopped me because of a virus showing on the web site. I have no idea where else to go for a Linkbox update.

2-14-2016 I had a very bad experience with the Linkbox this morning. I got all the sats programmed up to eutilsat117. When I tried to program in the last sat Galaxy23, it would not take and kept trying to go to the other end of the arc at intelsat21. Then when I looked at the program list it...

This is what I see on the Titanium Asc1: Lnb Type Set: H 18v V:13v H 13v V:18V Fixed on 18v Then If I click enough to go to the next screen on the Asc1 I see this: Fixed on 13v save quit Now I am even more confused.

I think the voltage settings are correct if I understand you correctly. In my message 16, I posted what was shown on the Asc1. I purchased the Asc1 in 7-2016. At that time I had the wires to the LNBF reversed. You directed me how to correct that error and I did and have not touched the LNBFs...

I was unable to edit my post. I really do not understand your comments about the voltages and what I see on the Asc1. Let me know and I will try to fix....

I have the same disequ switch I had when I got the Asc1. No 22Khz. I did have trouble back then and had the lnbs wired backwards. But fixed that and have not touched it since I got the Asc1. I have never done a reset of the Titanium Asc1. This is what I see on the Titanium Asc1: Lnb Type...

Thanks guys for responding. I agreed at least I don't have problems with the Titanium, Asc1. I did do a factory reset and it seemed to help somewhat. I set the dish at Intelsat21 at click count 1. Then I went to the Satellite Selection screen and set Intelsat 21 to 1. Next I went to the...

I did a factory reset. It did help somewhat. Galaxy 19 which had the most stuff now has almost nothing on it. Again Intelsat21 and amd9 are coming in just fine. I think I need to upgrade the software/firmware but don't know how or where to get it. Does the Titanium Asc1 also need a software...