Search results for query: *

Tried resetting our Joey for two days, finally after speaking with Retail Services, Retailer Development and Dash, they recommended we R/A the piece. We received the new one today, installed in 5 Mins, back up and running great. Seems that if you try to install the software on the Joey before...

Scott I have tried using another Node, same result. No splitters, replaced coax. The time changed to the correct time on the Joey so I assume the that activation took and it is getting a signal, just wont link to hopper, or allow me to restart the initial set up sequence. Thanks,

I have tried the above exactly as you wrote it, without success? I cant seem to get the Joey to download anything, every time I reset or unplug it as stated it comes back on to "looking for a Hopper to link with"??? I did the same stupid thing, I have a distributed video system in my demo and...

I will second or third this issue, No taps, single node, 1 Joey, 1 Hopper. Both Hopper and Joey see each other, but wont "Link". Tried all the resets factory settings etc. Programming on the Hopper, nothing on the Joey. Retail services was no help.

Just looked at my guide and am receiving three new denver channels on 6330, 6331,6333 looks like CBS, ABC, and Fox, hopefully NBC will come in later. No mention of HD in the info or guide and there are now shows currently in HD to find out, but these numbers have not been there before today...

If you rewind back to the beginning then hit record it will start from the beginning. Kind of a drag, but it works.

If you live close enough to the source(less than 30miles), there are many sites, or stores that sell small local antenna's that will mount on the dish itself, or use another pole mounted to the exsisting dish mount. Terk makes a model TV42 that clips to the dish, I have had some good results...

Your right, I forgot he mentioned that he wanted it for internationals before in his post.....Good call!

Problem here is dish will not compensate the dealer for installing a dish for locals, that should have been done direct through dish. I would call dish and find out why the retailer did it instead of dish direct. The switch is water resistant, however if the unused ends are expsosed then...

You can add another dp34 switch and get eight outputs from the original two. the basic dvr's like the 510 only need one input as they only have one tuner. The 921 or 721 need two inputs, but are not included in the free deals.

Welcome Tidal, Two cables are enough for four receivers with a Dish Network system. You will need a DP34 switch that uses two in and allows for four outputs, this switch can be located by your home run to make life simple for you. With the free system offered it will also include free install...

How about a new Stereo receiver that switches High speed component, they are getting more popular now.

Bingo! :D

After the buy back on a new customer activation, a retailer could still make a buck. However the unit should not be sold as receiver only when any real new customer would need a dish as well. Nov 17th? HA!!!!!

Re: Frustration...!! Some of us spent $699 for a 6000 years ago to get one HD channel of HBO!!!! It's been worth every penny now that I look back at it. If you keep waiting for the best product at the lowest price, you will never get what you truly want at the time. 8) Cheez, how can...

S-VHS would be your best best for the $$ the picture resolution is good for a couple hundred more lines of resolution. If its in the budget, go DVR

There are many Diplexers that will work in your situation, I use them daily with Dish network systems for backfeeds, as well as mixing ant/Sat signals. You can buy them at RS, I think even Walmart carries them. They are as easy as hooking up a splitter, only you use it backwards to mix the...

I read that same thing somewhere........Hmmm where was that..... :D :D

yes you will need a signal to get an accurate reading on your check switch. Try this set the sat to 119 use transponder 11 hook dish output to right side(facing dish) 119lnb use a compass to get the general vicinity then move dish 2degrees checking for signal each time. you will get...

ROTFLMAO :D :D :D

If you are looking for a coax output, then no the unit only has composite or s-video for the analog outputs. You can use a cheap modulator for now, or run it through a VCR first.

Amen :(

And seems they are sqeezing out the 5000 users with the superdish upgrade as well.

Mark, thanks for the post very informative! Whats the skinny on OTA HD for us northern Colorado dwellers????? Still low power down there? Thanks Stefan