Search results for query: *

So I was trying to be clever with a broken feed issue, but it didn't work, I'm curious as to why not. Setup is multiple receivers connected through an Eagle Aspen multi-switch connected to a legacy LNB, was working fine. Somehow 1 of the RG6 broke, corroded, I don't know what, whatever...

This is total B.S. HBO you suck! It's one thing to stop people re-recording, but to stop them even watching the damn thing, even in SD is plain stupid. Boo HBO Boo Dish Network for supporting this I use HDMI for my main TV and Component for Bedroom so I'm screwed BOO I confess I haven't read...

If this works as advertised this could be just what you need! "Refreshing design; attracts less fingerprint " :D

You could use a Slingbox & Slingcatcher networked over power lines using Slinglink or other Homeplug device. I personally would make the effort to cable the setup, because you're using HD and not even the Slingbox does HD properly.

Thanks!

That's what I thought, was hoping for an easy win !

I'm using a Legacy LNB for 61.5 reception and DP LNBs for the other locations. Is it possible to use a uS575 stacker between the DP44 and the 61.5 LNB to get both polarities on a single cable? OR Can I connect both ports of the 61.5 LNB to 2 ports on the DP44? TIA

I think tvropro's point was referring to SD channels that Dish has as HD channels, when they are not HD. The point is valid. SD on HITS is less compressed than SD on Dish, which looks bad, yes, I have both. A non-HD channel on Dish is compressed less than SD on Dish, so yes, it looks good...

Cool...will try, thanks!

Can I have a 72.7 only setup? My rcvr requests 61.5, 110, 119 or 148 during setup

I have LOS issues with 119 from my location

At the moment yes, I can add a 2nd for 72.7 thou...thanks!

Thanks!

This has probably been asked 000s of time...but what is currently the best LNBF for DN 61.5 using a 6ft offset dish? I spend time in the Caribbean islands and take my 211 with me. I have a CalAmp right now and it works okay but some Trx are very fringe. I bought an RCA branded DLNB2 but it...

Hookup a Linksys WAP54G in 'Client' mode, this makes the Linksys WAP54G act like a WiFi client. Configure the WAP54G for the network you want to use via the WAP54G web based interface, then connect to the receiver via CAT5.

Further reading indicates this is happening because of the daily early morning updates. Can someone confirm this?

Does the 322 have an Inactivity Timer? Checked an installation this morning and it had "Press Select to Continue" on the screen. I setup a ViP211k and in the menu there is an Inactivity Standby option (Preferences). I can't find this option on the 322. Anyone know how to stop this...

What I'm trying to do is the other way around. I want to control the receiver's 2nd TV output via infrared, not UHF - to change channels, access the Guide, etc.

Thanks

Hi guys, I'm looking at a setup of a 322 and 2 displays. I understand that the 322 2nd remote uses UHF not IR. Thing is, this setup would use a Crestron touchpanel system, so I need to control the 2nd output with IR not UHF. Anyone know if this can be done? TIA

Tried on: 110 77 Download progress to 92% then stops, 30 minutes pass, then it starts again from 0%, reaches 92% and the same thing. Both receivers behave the same way. Anyone else, or just me?

Thanks navychop, that might be the fastest response (for one of my posts) yet! Just checking, EHD = External Hard Drive? Thanks again!

Hi guys, I just bought a 1TB external HDD for $170 :) and want to connect it to my ViP211k I have some questions, if any of you can shed light: 1) I understand you have to pay to activate DVR on the ViP211k - do I pay monthly or a one-off payment? 2) Do I need to leave the rcvr on...

Thanks guys, that helps.

Hey guys, I was looking for some information on what is actually happening to the channels on 61.5 - I'm sure it was in this forum but a quick search yielded nothing. What I'm trying to find out is: 1) Is 61.5 going away? 2) If 61.5 is NOT going away, why are the channels moving? Thanks