Search results for query: *

  1. B

    DirecTV Cascading Zinwell 3X4 Multiswitch ???

    CURRENT Config -- 18 inch Rnd Dish 2 LNB - Zinwell SAM 3402 3X4 Multiswitch - two (2) Series 2 Hughes SD DVR's - all working perfectly! Question - I want to add another D* receiver or perhaps a D* DVR. Can I add another Zinwell SAM 3402 Multiswitch to the existing config (above)...
  2. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    Iceberg - Once again I appreciate your reply !!! Last question - If I decide to use the Phase III dish would I need to buy two Zinwell MS 6X8 WB-Z multi-sw's. One would be at the dish connected to the built in MS (all 4 outputs from built-in sw connected to 4 inputs on the 6X8 Zinwell)...
  3. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    Iceberg - Thanks for the reply - I was thinking about the future when I looked into the Phase III. Right now I have just the two TIVO DVR's' but I just re-finished the front bedroom and I was thinking about adding a D* receiver there. If I do the four feeds from the Phase III would not be...
  4. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    RE - Read Your REPLY -- I am having LOS ! That is why I am moving my dish to a location on my house where I will not incur LOS. My question was about the old config vs the new config ? I want to know can I use the Phase III - two RG6's run two SD DVRS ?
  5. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    Read your reply - why must I run four RG6's -- ??
  6. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    If I read your reply correctly - you are saying that I cannot use just two RG6's from the Phase III to my two DVR's ! I must run a total of four RG6 cables. ! Question - why can't I just run two and use my existing Zinwell ????
  7. B

    Pls Help - 18" Round D* to D* Phase III Two TIVO SD DVR's ? ? ?

    Need some help - my present configuration as follows: 18" round D* dish with two rg6 cables from dish into my house. Inside the two RG6's cables connect into a 3 x 5 Zinwell multi-switch SAM 3402 - output from the 3 x 5 Zinwell four RG6 cables connect to two Hughes TIVO SD DVR's. NOTE...
  8. B

    Need some Assistance reconfiguring my Directv install .

    I'm thinking about modify my exisiting confg - It is as follows: Directv 18" round dish dual LNB - connected via two cables to - Zinwell SAM - 3402 3x4 Multi-Switch - which connects two (2) Hughes DVR10's SD. (Note: Both work just fine- both have 180 HR hard drives) - connected to LG 47" HDTV...
  9. B

    Have D* w/Dual LNB and Want to add a multi-switch

    Want to say Thank You to all who provided the info above -- -- Bill --
  10. B

    Have D* w/Dual LNB and Want to add a multi-switch

    JerseyMatt -- #1 TY for the very prompt reply and the explanation - it was very clear. Have a follow-up - I'll try to be brief - Is there any particluar model or manufacturer of the "3 x 4" multiswitch that I should consider for purchase? Next - From your explanation - I read that I...
  11. B

    Have D* w/Dual LNB and Want to add a multi-switch

    I have a 18" Round Dual LNB Directv Dish with two(2) cables running to my Hughes Series 2 TIVO DVR. My TV is a Sony SD - no plans to go to HD. Have had D* for more than 10+ yrs and TIVO for approx. 5 yrs - upgraded hard drive 11/2008. Everyting work just fine. QUESTION: I want to add...