Search results for query: *

Hoorrrray! This cheapo ($9.99 ) PS works like a charm! http://www.smarthome.com/images/7747big.jpg http://www.smarthome.com/7749.html I am getting more than 98% on all channels. Couple of them I never picked before with the Voom Box. Thanks to all of you for answering. So, for...

Thanks for the test, I have ordered a 18 VDC PS, will try with that. Still don't understand how an AMP could work with Input AC AND Input DC depending on different situation :confused: :what

Thanks. But did you read the entire thread?

Diplexer /Combiner Install (for so many people including myself) ________________ Its working with DC power (from Voom STB) Non-Diplexer / Combiner Install (for 'Impatient' above and may be a few others) ____________________ Its working with AC power (PS 9370 ) According to Voom CSR...

Thanks Tell me one thing, the Antenna needs AC or DC? You said 18 VAC OUT. That means 9370 does supply AC (and not DC). The Voom box supplies DC ( I have verified it with multitester). So, how is it working now with the Voom Box? Does it mean that with the diplexer/combiner it needs DC and...

Radioshack does not have a 12 VDC power injector. Where else can I buy one? Would this work? http://www.smarthome.com/images/7747big.jpg http://www.smarthome.com/7749.html http://www.mpja.com/directview.asp?product=4501+TV (the power supply part only)

Ilya, I tried with a a multitester. No DC volt at all. I call the company where I bought it from (weisd.com). Guess what, they say, the PS-9370 is a AC power supply and not a DC one. I have measured the output and yes, it is a AC power supply. The guy offers to call Winegard and call me back...

Nope, exact same problem - no signal at all. The Radioshack Diplexer does not pass voltage on the antenna side. I think I have to get hold of a multitester. The PS must be bad. All I need to get from the 'working' to not working is disconnect the sat able from Voom Box and connect it to the...

Sure!

Sorry, My Bad. Its a typo. Its marked 'to preamp' and 'to TV' (and not to antenna). The issue remains though ..

Thanks Ilya. Just to double check 1. The coax from the roof diplexer is connected to the radioshack diplexer down below (say, D). 2. The 'sat output' of D (marked with DC pass) is connected to the PS 9370 terminal marked with "to Pre-amp" 3. The other end (marked with "To Antenna") of PS...

Unfortunately I don't. I just bought the PS off of internet. Anyway, somehow I think you are correct when you say "The only question is whether this power supply is powerfull enough to power the LNB and the antenna at the same time". So, if I can climb up there on the roof, all I would need to...

amrko, if you have the powered sensar II antenna and have diplexer install, it would not work, at least in my case it does not. As the antenna needs power and the sat feed from the diplexer (at the receiver side) provides the power. In my case I am just trying to provide an alternate source of...

Thanks Ilya, I have one receiver. I am connecting PS to the proper input. Is it time to RMA the PS then?

I am trying to use OTA in my HTPC without the voom box using the voom Sensar II antenna. I have a diplexer install. I cannot get up the roof to disconnect the diplexer or the dish so I bought a Radioshack diplexer to be used at the receiver end (call it X). I took off the moto diplexer which...

I am trying to use OTA in my HTPC without the voom box using the voom Sensar II antenna. I have a diplexer install. I cannot get up the roof to discconnect the diplexer or the dish so I bought a Radioshack diplexer to be used at the receiver end (call it X). I took off the moto diplexer which...

The only reason I am leaving the dish in the mix it that my dish is on the roof where I cannot reach it to disconnect. I have another diplexer from Radioshack (passes dc on the satellite side), which I can use, right? In fact, can't I just connect the coax from dish/antenna to this Radioshack...

OK, now I am confused too. 1. If I leave the diplexer at the receiver, how would I connect the antenna to HTPC? 2. Why are you guys advising on disconnecting the dish? 3. If I indeed go with my solution mentioned in my earlier post, would it work? (Remember, i am not trying to use the...

I am in the same situation as the OP. This is what I plan to do. 1. Take out the diplexer at the receiver end (the dish end would still be connected). 2. Buy a Winegard 9370 Power supply and connect the cable to it. 3. Connect the other end of the cable to my HTPC's OTA receiver...

If I disconnect the Voom Box and use an external OTA tuner, there would be nothing to power the Winegard Sensar II antenna. What kind of power inserter I need to use (replacing the Voom Box). Can anybody provide a link?

Ditto

MCE WAF > SAGE WAF WAF - Wife Acceptance Factor ;)

Mine was connected that way (with Verizon supplied DSL filters) but it still locked up. Of course, the other users should still try them and see whether it works. Good Luck!

I live in Franklin about 30 miles south-west of Boston (LOS) and Channel 44 is just fine for me.

Glad that it worked for you too :)