Search results for query: *

But this is a offset dish. :(

Hi, yeah mount is not orginal. Do you have photos of your dish pls ? Do you know what brand it is ? I need to get the correct focal length.

Hi, Other Part of the dish has letter A. Other than that there is nothing.

Can you pls identify this dish ?

Hi, Yes coax, goes straight to the dish no ground block involved. Those TPs are not weak. They are very strong and has very good signal.

Guys, I have very strange issue. When I use Vbox I get No signal for Certain KU TP's. But if I directly connect the receiver I have very good signal for the same TP. And also I have noticed that when its connect to the Vbox and when I go very close to Vbox for some of the torouble some TP's my...

Guys, I have ortho C/K with bulles eye feed fixed to 10ft mesh dish with one multiswicth and one diseqc switch . I have been using this for years. But recently when I'm watching C band all signal suddenly lost. So I have replaced new KU LNB and new diseqc switch. H side of C band LNB also didnt...

I think you just remove the two Teflon parts then you can receive V-H Signals.

Ok lets say we modified the KU lnbf by cutting the neck and fix a proper C band scalar ring. Because my brief testing i found cheap LNBF performs better than expensive Norsat. How is that possible ?

Its for 10ft prime focus dish. Lets assume we have proper feedhorn for Norsat.

Hi, Do you see any noticeable gain difference with very low signals?. I like to compare high quality LNB like Norsat PLL vs Geosat PLL KU LNBF. Like to hear your experience and technical side too. I'm especially concerned about very low signal stability.

I just bought this DVB-S2+DVB-T2 3G/16G KIII Pro Android 6.0 Amlogic S912 2.4G/5G Wifi Smart TV Box | eBay Have to track a 4k satellite to test this.

Hi, One of my friend has this Patriot dish. But the issue is he lost LNB mounting struts. So he is looking for measurements to build a new struts and lnb mounting. can you help ? height 200cm. width 188cm. depth 20cm.

Hi, Is there any way to use Two motorized dishes with single receiver ? I am in Asia and I have to setup a one additional dish for S band and that S band LNB has KU output as well. So I just thought to set it to the east side because I cant reach east from my other motorized dish. But how to...

Hoping for a speedy recovery for him. He helped me many times..:(

Guys what is this means for example pls check the below two links 1st link says 39 Degrees the 2nd link says http://www.ebay.com/itm/Prodelin-Offset-Feed-Horn-Tx-Rx-Ku-Band-39-Degrees-/252832791609?hash=item3ade023c39:g:0WkAAOSwzgBY2Vnc...

pls check the picture attached.

Hi, Guys how to find the "skew" zero position on a bullseye feed horn ? I have modified my bullseye by cutting the KU top part and attached a regular universal KU LNBF.

Thank you Cham. So if local oscillator frequency is 5150 MHz and TP 3660 V then pls tell me how do i calculate that ? also local oscillator frequency 10750 MHz and the TP 1170 H ?

Hi, My Spectrum Analyser says Tuning range 950 to 2150 MHz So if I want to tune in to a Transponder 12718 H then what Spectrum frequency I should tune ?

Hi, tnx for the response. I want to pass 22 KHz DiSEqC commands through all the lnb ports on a multiswitch. Let me explain. I have chaparral bullseye feedhorn. I want pass 22 KHz to get V/H Low band V/H High Band on a Universal LNB.

Hi, Great mod.. I want to pass 22 KHz DiSEqC commands through a multi switch. Any idea how to do that ? pls help.

GEOSATpro Model UL2PLL UNIVERSAL DUAL OUTPUT PLL http://www.ebay.com/itm/351444626323 This seems like a new product anyone using it ? How good this is for weaker signals ?

Guys I have a Universal ku LNB but having strange issue lets say on lyngsat.com shows a transponder 11170 V then after a blind scan my receiver show it as 11171 V. Same goes for other transponders. My receiver dispaly it multiplied by 1. why is that ? what I'm doing wrong ?

Perfect. Thank you very much..