Search results for query: *

  1. Trust

    [Viewsat] DMS International SG-2100 parts?

    Hi ftaseek , I have more of it . Have to find out the postal costs , where do you live (PM ?)
  2. Trust

    OTHER HH90 out of range

    I never tried . I dont know why there are 3 more magnets , reference point ?
  3. Trust

    OTHER HH90 out of range

    There are indead some SG2100 types with just fixed mechanic end stops . The STAB uses reedswitches activated by magnets in the half wormwheel
  4. Trust

    OTHER Old actuators and positioners

    The use of that 80:1 ratio of the new gearbox causes the half arc with a V-box . What kind of pulser is under the hood of the original motor ? Any pictures ?
  5. Trust

    OTHER Old actuators and positioners

    Can you show us a picture from the front and backside ? Its a strange positioner , I dont see relais for E / W , probably the 2 transistors do the job . The two red wires from the connector at the circuitboard are both connected to contact 1 at the backside and at contact 2 is a wire straight...
  6. Trust

    [Viewsat] DMS International SG-2100 parts?

    You can drill a 4 mm hole in the part you're holding and use a longer shaft . I dont know about the postal costs from the Netherlands but I can send you that part ( the part will be for free) It will fit in a envelope
  7. Trust

    OTHER Acuator info-Need Help-Replacing an old Maspro

    I think the + 12 v connector is for the use of a 12 V switch , use to set on or of in the setup menu . Better start with the +6 V for the optical sensor .
  8. Trust

    OTHER European dish in north america

    For sure its no CM feedarm and lnb holder .
  9. Trust

    OTHER Moteck SG2100 Motor Stuck

    You have to connect the power to M+ and M- or reverse but do this only when you disconnect the cable from the mainboard of the motor . Both relays shorten the motor leads when they are not on . see schematics If the motor turns a little at each attempt , it could be a lack of pulses provided by...
  10. Trust

    Linkbox Blind scan shows same channels on multiple birds

    Lnb 180º rotating is wrong , its must be 90º to get the opposit polarisation