Search results for query: *

Andrew, yes that is what we call a "ground mount". That is how the Fortec 6' dish used to be. The Sadoun 6 ft dish mounts on a pole (model P76) like this:

Hi Gentech, I just happened to visit here and saw you post about your new receiver. From what you have described it seems to be acting slow for some reason. Please send it back to us with a note to replace it. Put attention Judy. Include a copy of your receipt please.

Blind, I am glad I was able to find you those panels. The O.D. on the Sadoun P76 Pole Mast (the one you used for this dish) is actually 3" in diameter.

Pro96 How about $299 delivered sound for a fellow satguys member?

Manny, Is it a flat roof? If yes, then you can use the following mast: It has to be anchored properly though to prevent any water leaks in the long term.

Hi Guys, The Motor was discontinued at the factory level due to low demand overall. Also, I requested new diecast tooling for the lower bracket to make it more robust. That costs money and requires high order volume. I am not sure how many people would be interested in this and whether...

The 6ft dish will get almost 90% of the C-band signal out there with enough signal quality to keep a lock on the signal. Bigger is usually better since the dish will collect and reflect more signal from satellites. I am happy with the 6ft dish and user reviews have been positive the last few...

Manuel, Thanks for your business and comments about our dish This is actually a SADOUN brand dish and not Fortec Star dish. ~ It is a thicker dish than the Fortec (0.8mm vs 0.6mm) ~ Galvanized steel ~ Heavier duty mounting brackets and hardware.

MikeyII The Sadoun 180 dish hardware and metal quality are different (better) than that generic dish listed in the link you posted. We use galvanized 0.8mm steel while the generic one has non-galvanized 0.6mm steel. Also the mounting hardware used with our dish is heavier duty and beefier...

Check the Inside diameter of your 3 1/2" mount. If it is 3" or slightly bigger, insert a 3" I.D. pipe inside it and secure by welding or screws.

Johny The QARL-3624 (HV-24): 24" Super PowerJack Heavy Duty Actuator Tracker. 24" stroke length 36v Heavy Duty Actuator for use with C Band or KU Band (Prime Focus) Dishes up to 12'. So you should be fine with the QARL-3624. It will have a smaller ARCH tan the QARL-3636. We may have...

budfoot, nice design and work. You can start a new thread about adding polarotor controls to the GBox. Do a survey. If there is enough responds and interest, we might pursue it.

Johny What size dish you have? The QARL-3624 will move a 10ft dish fine. You can also get the HARL3636 or HARL-3624.

Thanks Anole. It was down during the night for an update. It is up now. Yeh, I appreciate a phone call if you guys notice it was down. I posted in another thread our mirror site address in case you need an alternative.

That 6-Way splitter is $12. We have 2-Way,4-Way,6-Way,8-Way Notice the frequency range on this one is 5-2400 mhz. All ports powered. Diode protected on each port.

Actually you don't need the DP34 with the B1Sat Bandstacker C-Band LNBF. You can just use a high frequency splitter to split the signal to multiple receivers. This is a much cheaper solution. Saving money is one advantage of having a bandstacked LNBF. This one will do:

No, sorry. This is the only color available:

Greg, Good report, thanks for the feedback. You can post the GBox Tips in a new thread so others can contribute.

Yep, usually a loose wire like that will create havoc. If it was not solved fast, it could have damaged the diodes in the GBox. Lesson learned: E2 Message on Display: There is only one error message -- E2 message for GBox. E-2 Message means NO PUSLES detected. Possible causes: *...

Yes, it is robust enough to handle that.

Divo, This mount is designed for the 180cm dish. The ring is not big enough to support a 2.4m dish. However, is it impossible, NO. Is it recommended? No.

I like Linux as well. Anything by the dreaded beast.;)

Ok, need more info. What type of dish are you talking about? What satellite are you aiming at? What is your zipcode?

Apple got products that people want and love. :D I am an Apple convert. I wish I have done that way earlier. Would have saved me a lot of hair on my head from the headaches with Windows and how slow it is.

NEW Sadoun SF95L DSS DBS Satellite Signal Finder Correct Satellite Dish Reception in Seconds! Price Ea $15.99 YouTube- Fast satellite dish alignment with a meter This is a new updated model of our SF95L meter. FASTER SETUP TIME. Get perfect satellite dish reception in seconds...