Search results for query: *

Back in business, finally. Thank all who responded for your expertise and patience., especially Brian. Power cycled the ASC1 when I got home from work. Appeared to be holding the correct polarities when changing xpndrs and, in fact was and is holding. While on 135W I adjusted the skew to see if...

OK, Brian, Starting to make sense. With the weather here in OH (snow, ice, 10deg F), it will be difficult to go out to the dish to rotate the feedhorn. But at least I should be able to get things inside working electrically. With the A3 set to 13/18V (Automatic Mode) and saved, the ASC1 Cursor...

When I set the A3 to 13/18V and leave the ASC1 at 18V, the Vertical xpndrs disappear. Still no Joy on Horizontal. After my recent post, I manually moved the ASC1 Skew pointer to Vertical. Horizontal xpndrs came in strong. So, I can get both H and V xpnders if I manually change it on the ASC1's...

OK, Took the night off last night to watch the Bucs win. Back at it. Set voltage at 18v in A3 and ASC1 LNB set to C-Band (5150) Set Skew to +45H/-45V Positioned dish for 135W. Using a strong signal, peaked dish. Scanned a bunch of new channels, mostly Scrambled. Using Lyngsat. verified that...

Here is a summary: A3 placed on sat @ 135 Deg. Active FTA xpndrs on this sat as well as all sats previously scanned in using A3 with DSR922 receiver for position and polarity prior to install of ASC1. Active vertical xpndr rescanned to insure on correct sat. Signal Strength 89/72. No signal now...

KE4, Saw your post. You can see from my response to Magic, 18v shuts down everything. No Vertical, no Horizontal. Yes, I have an ADL feedhorn with a co-rotor and Norsat C-Band and Ku lnb's. Started in this game back in '84 with a Chaparral with Cal-Amp C-Band LNA. Then switched over to C and...

Magic, I thought that the 13/18 volt was used by the ASC1 to interpret the polarity switch. But, I tried your suggestion. Set to 18V, the Vertical signal disappeared. Still no Horizontal xpndrs. Regarding the 45/-45 skew, right or wrong My receivers have bee using 60/-30 for well over 20 years...

As noted, polarity is not changing. Setting up a new ASC1 to work with A3. Was running A3 with 4DTV 922 receiver for position and skew control. A3 getting all sats OK and populated A3's channel list. Here's what I've done. Moved dish to 135 sat using 922 (Far West sat for me) Replaced 922 with...

See if this helps. It is the installation/adjustment info for a Raydx dish. Also, A photo of my dish which I have been using since I installed it in 1984. The mount/pole clamp is a second generation, beefed up clamp which Raydx sent me after the original clamp split during a violent storm. In...

A number of years ago I had the same problem. The lnb was new. As the evening went on, and the temperature continued to drop, the signal level would slowly decrease so that by 11 or 12 o'clock there was no signal. At first I could not figure it out. But, after a while, I came to realize that it...