CSpan currently uses a Digicipher II combo mode mux on AMC 10.
The mux includes CSpan HD and SD, CSpan2 HD and SD, and CSpan 3 HD and SD.
SD is mpeg 2 video and HD is H.264 video.
All channels are encrypted.
I found a prefeed of Days of Our Lives in one of the NBC muxes on AMC 1.
AMC 1
11840 H 30000
CH17 NBC Occasional
It aired at 12:00 AM PDT. It had national commercials, but no local commercials.
Thanks for posting this. I picked it up today. Only 20 miles from home.
It's a 10 foot Unimesh with two Echostar lnbs. A small tear and a couple of small holes in the mesh, but fixable.
It will replace my 10 foot Echostar X-10 dish which is useless for KU.
The Unimesh should be much better.
When is the last time a broadcaster added a new Digicipher 2 mux? All new muxes are DVB-S2. 4dtv and combo mode DC2 are going the way of Videocypher and analog feeds.
Both 3800 and 4080 are working at this time on my 10 foot dish in Northern California.
AMC 3 was replaced by SES 2.
AMC 3 is now at 67° West with AMC 4 pointed at Central and South America.
I don't think I've ever seen the RF Locked flash. It's either on or off. Authorize flashes when you are not authorized to receive a channel. It's solid when you are authorized. I've been able to view channels fine with just one yellow signal bar and maxed BER. Although it's best to reduce...
I have an old brain dead 920 that I haven't used in years. It started having some video problems displaying bright scenes and I replaced it with a 922. I read somewhere that the problem could be defective capacitors, so I started replacing them. I guess I replaced one in circuit with the...
3955 H 11.71 DCII 3/4 FEC (Coding Mode)
Manual tune frequency is 1195.000
You should be able to lock the signal using manual tune, but unfortunately without the proper maps, you won't be able to view any of the channels.
GB-410 on my 922 went OC last week. Since the maps were pulled from G1-3, there was no way to get a hit which fixed the OC problem before. So I decided to try the 66780 to see if it made any difference. My EMM changed to 0. I soon discovered that I couldn't receive any ZK or FP channels...