Search results for query: *

Have not posted here for a while but in response to circular polarization, i made my own feed using a Chaparral Polarotor and Av-Comm circular polarizer barrel purchased from manufacturer in Australia i am here in the states using a 7 1/2ft Winegard Quadstar dish getting decent reception on all...

Ajak H-H 180 with mounting ring Chicago Craigslist https://chicago.craigslist.org/chc/ele/6019577764.html

I am getting every transponder except 4056H here in Chicago with a 7 1/2 ft dish.

I was able to find a extra motor that was given to me by a retired satellite installer a few years back, it looks exactly the same as the one you have there is a small magnet wheel that is screwed right on to the shaft over the white plastic cover, the reed is inserted into the holder the other...

It should be rated at 36v post some pictures i might have one laying around i like to see if its the same.If you run 24v it might turn a little slower.

It sounds like a very intersting process a little bit dangerous. I used a parts sandblasting machine but i was able to get all the rust out and immediately sprayed it with primer. Now for the fun part i pressed out the main shaft i have to replace the Teflon sleeve with a bronze sleeve...

Its not a rust bucket anymore if you bother to look at the pictures in fact it will be better than new when i get done with it,i am not new at this game i have rebuilt several over these years i know what i am doing. As for the other one no thanks.

I have the reed switch but i am not planning on using the same motor, i have another one sitting on the top of the bench right next to the old motor.

I was able to locate this motor it was laying outside in someones back yard who knows how many years, i am currently in the process of rebuilding it as you can see all the rust has been removed through sandblasting it has been primed, i will be removing the main shaft to replace the Teflon...

Got it from a satellite installer he had it in his garage he did not know much about it. I am going to clean it up see if it works and maybe install it on a 7 1/2 foot winegard, maybe i can adapt the ring to fit the back of the dish. The only thing that is missing is the side metal cover but i...

Does anybody know who made this mount? i just recently acquired it does not look like an Ajack, i never seen anything like it.

I am thinking of purchasing a Dual c feedhorn does anybody know if it has provisions for a dielectric insert for Circular Polarization. Thanks.