Search results for query: *

This is how MY 22k switches work. When A is selected no signal or voltage is sent to B. When B is selected a repeated 22k signal gives full power to B and a intermittent and repeated every (approx 1 sec) full voltage to A. You may want to test yours with a digital multi-meter

22k switch would use less power because A is default and would only draw power is when B is used. External power supply is normally used to change polarity on the LNB to make up for long runs or a bad cable. As for anyone local that could repair my system?/ not here ether. Most dish/viasat...

Could you check the measurement? I and others are interested ..

I read the post with the pansat stacking. what brand is good for stacking and does it depend on your receivers capability?.

Use a 1.0 switch or a 22k switch at each port. Up to 32 ports with (8) 4 port switches.

What was your Final settings for the LNB. From the dish center and the holding arm to front center of the LNB?

The new Lnb"s are made for round dishes. Using it on a parabolic dish you will ether under or over illuminate the dish because of the shape. I Tested my hughes dish Moving the LNB closer then 201/2" caused signal loss. 233/4 was the farthest from the dish without loss. A 2 inch sweet spot...

I had to wait for day light to take measurements. 103w (cozi & nbc feeds are good) I have the LNB set at 201/2 inches from the center 4 bolts of the dish, and 31/2 inches from the holding arm to the center of the LNB. When I measurements to 99w (info wars , JBS, news feeds) It is set at 21"...

I have one of those Hughes Net dishes, it works very well, good quality dish. But you must find the exact focus point and offset angle. Use 8 little square mirrors, one inch square or aluminum foil squares Attach mirrors to the dish in cross pattern (vertical and horizontal) but not near the...

I have 2 of dishes like that. Use the old LNB to position the new one then fine tune it on a known signal. They are made for only 1 LNB and make a great FTA dish.