Search results for query: *

SGS... Regarding a 10 vs 12 footer. One thing to keep in mind is the mathematic reality that a larger dish has a narrower bandwidth. What this means in practical terms is a 12 footer will need to track the arc more accurately than a 10 footer. If you want to use the bigger dish for Ku also...

Where in Florida are they? === Bill

Martyn DVIDS does show some cool uplinks but it is not showing video more than it is. Me personally... I'd shoot for 99, 101, 103 and 105. === ?Bill

One comment I will add in addition to the ones about where you are in the arc and the counts per inch all making a difference. My C-band dish is a good 250 foot run from my receiver. I was having same issue with positions slightly changing and mostly as you going too far which I determined was...

My neighbor and I lifted the dish up on the mount. DH Satellite delivered to my front yard only. The dish was 105 lbs so it was a bear to get up with two people. Three would have been easier. The instructions were very well written and not in Engrish ;-) Here is the paragraph on...

Thanks, Anole. That DH dish is a beast. The one piece 10' 0.125 thickness with 48" ring and mount for 5.5" O.D. pipe was $1059. The 5.5" base was $510. I also bought a 36" Venture actuator from them for $369. I don't remember the delivery cost but it was a few hundred more from Wisconsin to...

BTW... I really wanted to buy from Mike Kohl or Jeff Schumann but they just seem to take too long to resurrect the mesh dishes. === Bill

I bough a 10' spun Aluminum dish from DH Satellite a few months ago. Expensive but well worth it for me. They delivered on a custom trailer to my house after having delivered to a TV station in Mississippi then to my house then the Fox station in Orlando. === Bill

Have to agree with Truck racer. I was using an 8 footer here in south Florida (34957) and 87w was among the most flakely satellites I was getting.... especially the RTV muxes on 3920 and 4000. Swapped out my 8 with a solid spun aluminum 10 footer and have not missed anything on 87. Be aware...

ken2400 I have a G-Box hooked to a 36V actuator. The dish is 200 feet from my receiver. I used 6 wire sprinkler wire from Home Depot. Knowing the motor draws a lot of current, I used 2 wires for each of the motor leads, and 1 wire for the sensor leads. I used: Red and the Brown wires to...

Tweaked the dish but still no 3800's Well I tweaked and tweaked the dish and my LNBF skew & f-d: still no 3800 H signals. I do have 72W AMC6 coming in at 100% quality on my AzBox now. I also have the 87W 4080 H 29125 RTV stations at 75% Q. I do see the same thing as you guys with the 87W...

Are the RTV stations on 87W 3800 H 29125 up? I can get the ones on my AzBox at 4080 H 29125 just fine with my 8 foot dish. I can see a signal on 3800 H 29125 with my First Strike meter but cannot for the life of me get anything with any combination of PIlot, FEC, SR or Frequency get the 3800...