Connecting to rv

[jeleben]

i have a manual dish 1000.2, I’m connecting to 2 inputs in my rv to 2 Wally receivers. My question is 1. Do I need to run 2 lines from the dish to each of the inputs or can I run one line and split it at the connection.

2. From the living room connection I want to split it to 3 TVs, so I can move the receiver to whatever tv I’m watching. What type of switch do I need and can I connect it from the satellite in to living room connection. Thanks in advance.

 

[bwexler]

There is more than one approach.
I have a Hopper 3 and 1 Joey. I wanted to be able to watch 3 different TVS, but I am OK with the same channel on all TVS. I have an HDMI splitter and long HDMI cables run to each TV. This works great and is much more convenient than moving a receiver from place to place. No need to connect and disconnect cables and the RF remote works well from room to room. We do have a remote in each location programmed to control the TV located there.

I don't have the knowledge to advise you on a switch to run the receiver in multiple locations.