If my elevation is 40 but there is an obstacle with an elevation of say 38 in the way, is that enough clearance? (Its a dish 500) Same thing with azimuth, how much obstacle clearance from the peak angle settings do you need to ensure a good signal ?
Obstacle clearance ?
- Thread starter Thailog
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Degrees is a variable amount of separation depending on distance. For a typical LOS check, carload's post is basically correct. However ...
I've got a Dish 300 that's pointing through a hole between 2 trees and over another one. The trees are 80 feet from the dish and the hole has about 5 feet of clearance on each side. That's enough room for the trees to move in the wind and not block it.
I've got a Dish 300 that's pointing through a hole between 2 trees and over another one. The trees are 80 feet from the dish and the hole has about 5 feet of clearance on each side. That's enough room for the trees to move in the wind and not block it.
