swapping out a 625 for a 622?

[brian913]

OK guys here's my situation...
Downstairs I have a 622 on one HDTV. I want to leave that alone. Upstairs I have one HDTV and one SDTV. A 625 runs both of those. Ive allready purchased another 622 but have not installed it yet. My question is can I just take out the 625 and hookup the 622? I have a dish 1000 outside im not sure what switch I have but I think it's a DPP twin? Does that make sense? Hooking up the HDMI cables is no problem. I just want to make sure that im not missing anything. Any advice would be appreciated. Thanks.

 

[Roadwarrior]

Just swap em out. It will work.

Err. except the modulater for TV2 might need to be configured to match the channel the current 625 tv2 is on. It's in the menu under modulator. I'm not sure what the menu number order is on a 622, but it should be easy to find.

 

[RandallA]

Swap them and run check switch. Menu, 6, 1, 1, Check Switch.

 

[SummitAdvantageRetailer]

Yes, make sure you do a check switch. The satellite wiring is the same since both are DP Plus. Make sure you don't change the default mode of Dual Mode to Single Mode.

 

[brian913]

thanks

you guys always come through