Update to dead in the water.
I called the boys in California and spoke with the General Manager, Eugene, who seemed very knowledgeable,
Professional and helpful. He had me retrive information for him and try diffrent things...to no avail the final request was to do a factory reset, disconnect power for 20 seconds and enter all information again. After so doing still no signal. I thought that perhaps if I changed the lo freq to something else and then back to 10750 it might help, you never know. What happened next was rather odd. The quality suddenly showed 10 and at the same time I heard a snap. I am not sure if it came from the tv audio or the micro box. The quality jumped back and forth between 10 and 70 then held between 67 to 70. I was able to get back all channels and sats I rescanned.
I would like to believe that I am not an Idiot! I do not have the ability to state that I have been at this for 30 years, but I try my best and after all isn't that all one can ask for?
And before i forget it currently the GeosatPro Sl1pll is in the system. As time prevails I will readjust the sat dish. A vertical adjustmeat at a most east sat and a horizontal at the most west sat. If any of you have a better way to set the proper arc let me know and I will give it a shot, oh yes I moved the lnb front to rear in the holder and it is set to 0 deg. On a blind scan of 83 w, I got TUFE,PBJE andRTVE, had to do a preprogrammed PT's to ger the rest.
Thank you all again,'
SAM