I want to split my TV2 output to a 3rd TV and then buy another UHF remote. My question is how do I configure the third remote? Does it get the same settings as remote #2?
Splitting TV2 & 3rd remote?
- Thread starter Plumcrazy10
- Start date
- Latest activity Latest activity:
- Replies 5
- Views 1K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
The same as the TV2 remote that you already have would be far and away the easiest. You might seek out a later model if there's a device that the current remote can't control.
Not knowing that receiver we're talking about, I can't be more specific.
yes but it requires you to UHF convert the first remote. That means having a UHF remote (model 6.3,6.4,and 21.0 only) with the proper tab in it. Also you can turn on the TV-1 on the remote distribution port (menu,6,1,5). The IF remote will still work BUT you need to have it on the same remote address as the TV-1 UHF remote.
P.S. Don't leave the address set to the factory default of one.
P.P.S. If you press #^ (^=up arrow) before you enter the address you will end up with an address 16 higher (example 4 + #^ = address 20).
P.S. Don't leave the address set to the factory default of one.
P.P.S. If you press #^ (^=up arrow) before you enter the address you will end up with an address 16 higher (example 4 + #^ = address 20).
Last edited:
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
-
-
TOpus 4.6: Found the Sandman Walk Episode! #shorts
- Latest: TWiT Tech Podcast Network
-
