Recent content by acefr

I think he didn't physically move to a new location, but pretends that he moved into a new address so he can receive the local channels of the new address. In that case, he probably doesn't want to hook up the phone number as the caller ID will tell D* that he is at a different area code... By...

I have a D10 box. If I choose "oval - 2 LNB" in dish setup, does it use a 22KHz signal to switch between sat 101 and 119?

I just want to use up the existing dish that I have.

I have an extra round dish that is of no use. I am thinking to aim it to sat 101, then use a 22K switch to connect the 101 and 119 LNB to my standard D10 receiver (I made a typo on my receiver model in the first post). Do you think it will work?

jimisham, thanks for your reply. This is exactly what I was looking for.

Does anyone know the transponders for the following channels: 450 451 452 453 454 These are all Chinese channels and are on Sat 119. I am trying to see if they are on the odd or even transponders. I couldn't find this info on lyngsat. Thank you in advance.

Thanks for the info, Mike. Does the 4x4 swtich require both output from the sat 119 LNB? If so, it may not work as I have used one output of the sat 119 LNB for the FTA already.

Posting Error. Please Ignore Sorry.

Does any one know the multi-switch that comes with Phase II dish is the same as the 3x4 aftermarket multi-switch? I have two 18" round dishes, one pointing to 101 and the other pointing to 119. I have only one D10 receiver and try to make it using two 18" round dishes I already have by choosing...

I have a HR10-250 box and a valid subscription of Jade World (chinese). From Lyngsat, I found that the chinese programs are on sat 119. I have an existing 18" single LNB dish currently pointing to 119, but I have problem setting up the box to use it. When I chose the dish type in installation to...