Recent content by bigmudge

  1. B

    Vs2000

    I have this exact menu up but ounce inside it limits what you can do
  2. B

    Vs2000

    Under auto mode when you change universal to standard High/Lo leave and just frequency appears. I set it 11780 but no change.
  3. B

    Vs2000

    I dont have anything else to try this is all new equip could I have a bad receiver?
  4. B

    Vs2000

    On my vs2000 ounce you change from universal to standard all you have is frequency Lo is not an option.(This is in auto) I can enter all this info in manual mode but the result is the same. auto-failed noCH
  5. B

    Vs2000

    Galaxy 3 is supposed to be my true south I have scanned by-passing the motor also turning the motor off. One of the thread said that coolsat LNB is stsndard I've scanned both standard & universal with the same result auto failed.
  6. B

    Vs2000

    Yes Sir I have read and re-read. After a week of double/tripple checking I have yet to see a channel of any kind.
  7. B

    Vs2000

    Does anyone have have a vs2000 that works? I dont see this receiver talked about in the threads.
  8. B

    please help with set-up

    I think this is a receiver compatibity issue. I re-scanned with the same result. It could be that there is some info that needs to be manually re-entered. After a bunch of hours I am stumped. Just had another idea to try to see any channel I bypassed the motor/rotor went straight to the lnb...
  9. B

    please help with set-up

    I have went and got the in-line meter it is showing good signal after fine tuning the signal with the meter signal stregnth is 90. My problem still exists no channels.
  10. B

    please help with set-up

    I have an old bb4 receiver that has signal & quality meter but I hooked it up and Galaxy3 is not in its sat list. there is a GE3 @ 87degrees & telestar 5K @ 97degrees I thought 97 is where galaxy3 was on my vs2000
  11. B

    please help with set-up

    I set the rotor & dish angles both @ 37 degrees
  12. B

    please help with set-up

    First Time- Yes Strength Meter-no I have tried auto & manuel searches I am scanning Galaxy 3c 97 degrees w 67330 Latitude 37 degrees Mounting Pole I will double check (ok) This is all new equipment from FTA Direct
  13. B

    please help with set-up

    coolsat my lnb is coolsat RF:11.70/12.20GHZ IF:950/1450MHZ GAIN:60db NoiseFigure:0.6db I changed from universal to standard but still dont pick anything up.
  14. B

    rotor reset

    I have a vs2000. I did what you said and found a motor menu it went back to zero. Thanks
  15. B

    please help with set-up

    I have a vs2000 receiver and a hh90 rotor on my dish. I get a signal of 70 but when I search it picks up nothing. LNB POWER-on LNB TYPE-universal Lnb FREQUENCY-11749 HIGH-5150 (changedto get signal) LOW-11475 DISEQC-none SEARCH OPTION-all MOTOR-user When search is done it says auto...
See more
Top
Back