Recent content by ebehalifax

I bought from ebay this new Ku DUAL LNBF .4 noise figure made by LAVA to replaced my old working International dual LNb .6 noise figure. I am using DVR 522 two tuner with no switch getting signal from SAT 121 only. I installed and i run the check swich on my receiver, it will stop after...

I thing I state in my previous message that I did this. 4900 o.k for both sat 119 & 121, but the 522 only good signal for sat 119 and as for sat 121 fluctuating up and down.

The reason why your 121 would be going out and not the other satellites is that the frequency is different for 121. There is probably some terrestrial interference going on. Does anyone have a radar detector around there?

O.k but why in my situation the dvr 522 receiver, signal is playing up and down on sat 121, signal is good on sat 119. but the receiver 4900 has good signal on both 121 and 119 , using the same cable, same dish, same lnb. Let's say there is radar detector or something like this affect the...

Looks like you have the same problem as mine with the 522, but my dilama is with sat 121. I dont thing is the LNB, it could be the tuner for that receiver required a strong signal from this particular satellite 105. to improved in my opinion try an lnb with a very low noise figure. I am going...

No, I am using Ku LNBF for sat 121 only. By the way, i did try before dss lnb getting signal from 119 and it is fine on both receivers. Only the signal from Sat 121 good on one receiver 4900 and not on the dvr522. As i said early , using the same cable , the same dish , the same lnbf. I did...

I have a dvr522 and IRD-4900, the signal strenth on the 522 on both Tuner playing up and down like crazy, it goes from 98 to 70 then drop to 56 or 40 then up to 88 .... so the picture and sound are cuting out as the signal drop down, then good when the signal goes up... I connect the Ird...

i have a weird problem. my dvr522 keep loosing signal from sat 121 but ok with signal from sat 119. The same cable from sat 121 tried it on another receiver 4900 , works fine on that receiver.

Hello, I am having a problem with the 121 signal and hope someone can help me with new ideas.... I have a 39 inch dish and a single ( do i need dual?) universall Ku-band linear lnb LOW BAND 10.70~11.70 GHz,HIGH BAND 11.70~12.75 GHz . I plugged the it directly to a 4900 receiver, no...