Recent content by ghoff

  1. G

    Recording skips and guide says "to be announced"

    While watching NFL football, the DVR stops recording and looses recorded content. It will not recored because the guide says "to be announced" We noticed this on 2 different DVRs and different channels, including 206 ESPN, 212 NFL network and local channels 11 CBS & 21 Fox. The DVR receivers...
  2. G

    Maintenance contract with Directv or pay per visit?

    As indicated in my first paragraph, I was having video problems with a HR-20. I could see the guide, menu and setup, but the channel would not show up. Called Directv tech and after about 1.5 hours, they wanted to send a tech. I didn't want to pay for it, so I decided to troubleshoot myself. I...
  3. G

    Maintenance contract with Directv or pay per visit?

    Thanks everyone for their response. My main question, whether or not do the monthly maintenance contract, has been answered. I am sticking to doing my own troubleshooting. I finally did install the 5LNB with the SWN-16. It works perfect. All receivers came up the first time except for the one...
  4. G

    Maintenance contract with Directv or pay per visit?

    I have 5 HD DVRs connected to SWM. I have a HR20 that looses video from time to time. I have rulled out cabling. Thinking it must be the DVR. Talked to DTV and they would look at it for about $50 or I could sign up for a maintenance contract. What do most users do? Keep buying new boxes, use the...
  5. G

    Adding 5th Receiver in SWM setup

    No thanks, I think I have a regular LNB somewhere.
  6. G

    Adding 5th Receiver in SWM setup

    Got it.. thanks for your prompt response. This is just like owning a boat, always something else to buy. :)
  7. G

    Adding 5th Receiver in SWM setup

    Before the addition of the HR24, I had the following setup.: Receivers: HR20 x 2 and HR22 x 2 SWM LNB: SL5SPIG-P SWM Power supply: PI-21 4-way Splitter: SWS-4 Added a HR24 receiver and changed the splitter to a SWS8WB-P with 75 ohm terminations in the vacant connectors. So, after the...
  8. G

    DirecTivo HR10-250 Blowout!

    I've called twice and the best they can offer is $399 plus shipping. Any suggestions? I'm using the 800-824-9081 number.
  9. G

    Winegard SquareShooter

    I had the amplified square shooter. I had to replace it with a Channel Master STEALTHtenna. I could not get the lower VHF channels (2-5) without a lot of snow. I'm very happy with the CM.
  10. G

    Get a Free DIRECTV DVR with TiVo!!!!

    System Error I received a system error, try again later. Anyone else get this message?
  11. G

    squareshooter

    I need to add my 2 cents, for what's it worth. I bought the Square Shooter 2000 from solidsignal. I'm in Colorado Springs. I'm about 15.1 miles from the transmitter source. With the Square Shooter, I never could get the lower VHF channels very clear. I even increased the amp to 21 Db, but no...
  12. G

    Spaun? Eagle Aspen? Terk? Channel Master?

    You are right, Terk is not good. I have experience with Terk and Eagle Aspen and I Eagle Aspen is an excellent choice. At least Eagle Aspen publishes their specs. From what I have heard, Spaun is an excellent choice, as well. I just have not had experience with Spaun. I am happy with my Eagle Aspen.
  13. G

    Poll: Dish Turnover

    I left Dish after 4 years and went with Directv early January. The main reason I left Dish was the unreliable 811. However, the grass is not always greener on the other side of the fence. I am still waiting for my third replacement of the RCA DTC210 HD receiver from VE. The first 2 died with...
  14. G

    HDMI to DVI

    After looking at your manual on www.samsungusa.com, the only way this will work is as follows. DVI from the 811 to DVI to the TV. You will need to use the RCA audio jacks next to the DVI connector on the Sammy to connect to the audio RCA audio input on the 811. The DVI connection is digital, so...
  15. G

    HDMI to DVI

    I have the 46 Samsung DLP with DVI and I have to use the PC connections for audio. Perhaps it is the same for HDMI.