Recent content by gong

I want to win! I want a Motorized FTA System so that I can point to all southern sky satellites that I want to see. gong

Yesterday, I was successfully setup Mytheatre with my new Twinhan 102g DVB-S card and I could able to get T5 channels well and watch TV with it. But I have a problem that I don't know how to setup Mytheatre to use the Twinhan 102g remote control. Thanks for help in advance. gong

I would like to win the Fortec Mercury II to replace my broken BEC 6600+ receiver which has the power supply broken. I need a receiver to receive NTD free to air Chinese program from IA-5 at 97.0 W. Gong

I finally get it work I keep testing and replacing the 4X1 DiseqC switch and testing it one by one. Total testing 6 Coolsat 4X1 DiseqC switches and 5 pansat 4X1 DiseqC switches. Finally found only one pansat 4X1 DiseqC switch able to switch all 4 satellites including the one has 40 feet...

It is not generic for PCI card It is not my PCI card setting, it is pci card has not enough power supply. When I disconnect one hard drive(I hoop up two hard drive and two CD-ROWs) and one CD-Rom, it able to switch 3 satellites that closing to the pansat switch. The one has 40 feet longer...

Yes, the switch is still work with bec 6600+ I did turn off power when I disconnect cable. The switch is still working with my BEC 6600+ receiver. It just does not have enough swithing power to turn on the switch with the 102G PCI card. I do not know what kind of Diseqc 4X1 switch I should...

I recenetly bought a 102G PCI card. After I install it in my PC, I found out that it does not have enough power to switch my DiSEqC 4x1 switch. I know my DiSEqC 4x1 switch is OK because when hook up my BEC 6600+ receiver to it, it works perfectly from port1 to port4. But when I put back the...

I just bought a viewsat 2000 receiver. Trying to set it up with my motor sg-2100 but can't find any way to conrol the motor in the viewsat 2000 menu. Althoug in the menu has a motor section, but it does not offer the diseqc 1.2 selection for controlling the motor.

Problem solved by modifying the ini file After go to RitzDVB website, I found out a discussion relating the DiseqC and 22Khz switches setting infomation. I followed the infomation and making changes in the ini file. It is working now. Gong

I have jsut install the RitzDVB for the 102G. I have troble to select the T5 satellite. My T5 settting is 22Khz is on and DiSEqC port is 4. How do set the following value in the ini [LNB] section LOF1, LOF2, LOFSW, DiSEqC and DiSEqCType? Also in the Hardware/Channels&LNB after choose a...

BEC 6600+ is better than the trixs 2500 BEC 6600+ is better than the trixs 2500

Download factory bin is not enough. In your case, you need to reset the database to factory setting. Then reflesh the 1.2 bin, and download a known working channel list into your receiver. Then everything will be fine. If you just download the factory bin 1.2 without download the channel...

I have problem with G10R too Do you use a motor or not? If you use a motor and make peak on the weak signals on G10R, you will lost the arc and you won't able to get all the satellites. I have the same problem with 11720 V with my SG-2100 motor and a 30" dish. I'm sure my setup arc is...

I have the same problem with mine If I make the setup peak on TP1 for Galaxy 10R, I won't able to track the arc right and some satellite I can't view. When I get all the satellites, I won't able to get enough signal on TP1 for Galaxy 10R

metal pipe brackets for lnb holder Would you post your metal pipe brackets picture so I can go out to a hareware store to buy one. I have trouble to hold the second lnb. Gong