Recent content by Hungster

I'm giving up on this DMX741U combo lnbf...... could not get it working at all... using single cable, two cables, internal switch, external switch.... can pick up C but no Ku.... went back to the single c-band lnb... separate Ku-band dish might be the way to go now... One quick question for...

Great! thanks for the tips, Lak7.. That will be my aim for the weekend.

Hi Macgod79, Yes I do have it setup correctly rotating through the Clark Bell, I can pickup all the FTA C-band, but can not get any signal on the Ku-band, I have a feeling that the switching is mot working properly. I am also using the Openbox S9, same as you, and a G-box positioner to...

Alright! Good to hear, at least I still have some hope trying to get it working. When you said it has to be perfect, did you mean the position have to be spot on, Macgod79 ? That would be hard!

Thanks Gunnman, for the heads up.... I'm having doubt now that my DMX741U would work with Ku band ... but will try connecting directly to the Ku LNB port this wkend as Lak7 suggested... The problems is I only have one cable coaxial cable running in the wall from the ground flour right up to the...

Hi FaTAir, Could not get any Ku on any bird, seems like the switch is not switching between C and Ku band.... Thanks for the link, but I think those freq are not available any more ? Will keep trying, I hope they didn't send me a dodgy LNB... I'm trying to get these channels from Vinasat1...

Thanks FatAir, really appreciate yours and everyone's helps... I'm in Australia so I think i'm in the Vinasat's foot print. I'm a setting it up with your instruction: "741U uses DISEQC switching for band selection. Port(LNB) 1 selected for C band. Port (LNB) 2 for Ku. Normal programming is: LNB...

Hi Guys for all the reponse.... I've tried setting it as Carlospr43 suggested by creating two SATs, and below is the setting for Ku bands and setup the settings as Carlospr43 mentioned, butstill no signals for these transponders: 10968H (28800) - Ku Band 11090H (28125) - Ku Band 11116H...

Can not pick up Ku Band with DMX741U <p>Your browser does not support iframes.</p> Hello again every one, It's been a while,... and I'm desperately need your help again... I've set up a new system which consist of a 2.3m mesh dish, a Gbox DiSEqc1.2 positioner, Openbox S9 HD receiver, and a...

Can not pick up Ku Band with DMX741U Hello again every one, It's been a while,... and I'm desperately need your help again... I've set up a new system which consist of a 2.3m mesh dish, a Gbox DiSEqc1.2 positioner, Openbox S9 HD receiver, and a DMX741U. There are several satellites I want to...

Wonderful....!!, much clearer, I know what to get now... thanks SatelliteAV, Magic Static and Cham.... what can we do without you guys.... One quick question for Magic Static, you meant the whole pencil diameter, or the lead of the pencil... the holes on my mesh dish is a bit bigger than the...

Dear Magic Static, and Cham, Thank you very much for your super fast response.... Greatly appreciate! To answer Magic Static's question, I'm trying to pick up the c and ku band channels from Vinasat1(3413V, 3433V and 11549H) and AsiaSat5 (12437H and 12477H) and another couple of satellites...

Hi I'm new here and trying to find out which one of these units is suitable for my setup, the DMX741 standard or DMX741U. I have a 2.4meter(8') mesh dish, a Strong SRT4669x receiver, and a phoenix DiSEqc1.2 positioner. Could anyone please guide me to the best suited unit LNBF, to be able to pick...