Recent content by JeremielMontanez

Thanks everyone! Yes it was the button on the TVs remote that needed to be adjusted. I even got it working through the HDMI now, much better picture. And, with the TVs remote I can select for either Free to air antenna, and get my of the air channels, 13 of them all free! or select the...

OK guys Thank you very, very, very, much. I got it! There was nothing wrong with the Openbox. It was the TV. You have to set the TV to the right input. But anyway I got it working only because you all helped. I would not have checked and put the TV where I have now, on the composite setting...

I am getting confused. Right now I am hooked up to the digital TV through the HDMI cable. But it is still getting the over the air channels. Do you mean I should switch back to the red white yellow RCA then do the VFORMAT thing? I am going to try both and see what happens.

Yes! that is what I am trying to use. The Red White and yellow RCA connections.? I also dug up an old HDMI cable I still had from when I had from when I had a subscription to Direct TV and tried hooking it up to my digital TV with that. I still get no picture that way either. I'm not sure I...

I bought it new several months ago, but am just now getting around to trying to set it up. I have only tried to hook it up to my old analog TV via CVBS RCA cable. I'm not sure I know how to set my digital TV up to work with HDMI. I don't understand about the component, or composite?

I have an Openbox S 10 that I bought a few months ago that I am trying to set up. I have read the manual (which is written in a way that is very confusing) and I have been looking through the posts on this forum and others for help in trying to make it work. So far I have not been able to get...

Well now that it has stopped raining here in Florida, and the ground isn't all mud anymore. I started working on installing my c band dish again. I already have the pole in the ground and cemented in place. While waiting for the cement to cure I started reading the installation instructions...

How can I get the Map Master program, and what is it I have to buy for $68 dollars and where? Now that I have replaced the battery on my 620, and am close to having the 12 foot dish set up I would like to have everything I need for programing the new map as soon as possible.

I'd rather watch Green Acres than the stuff they produce now, but then I would rather watch a rat fight or paint dry than the stuff thy produce now.

When I was about 10 years old, (that was sixty years ago) one day I stuck a dinner knife into a wall outlet and discovered electricity. Good thing the knife had a plastic handle so I didn't get killed. I started collecting old radios that people threw away in the trash and I'd try to make them...

Jeremiel is just a nickname. My real name is John, and my call is KC4TXC. I was AAT4YA Army MARS, but I haven’t been active in years. I'm General Class licensed since I can't remember when. I'm 70 years old, but I'm probably going to put up a few antennas and get active again since I now...

I received my lithium battery from Digi-Key today and successfully installed it. The new battery is dated 5/12. The old battery is marked 97-6 which I think means June 1997. That makes it 15 years old. It is still reading 3.66 volts. I don't understand why it was necessary to change it, but...

Here are some pictures

I went over and got my 12 foot c band dish today. It actually was not as hard as I thought it was going to be to dig it up. After first taking the dish off the post I dug all the way around the cement then attached a chain around the cement and pulled it out of the ground with my SUV. Here...

I just looked it up. DigiCipher 2, what the heck it's just like me. We are not totally obsolete yet :O). It will only take me another couple of minutes to change that battery too, and then it will be there if I ever need it.