Recent content by JoseOle

I just wanted to let you guys know that everything is working fine so far, hopefully it continues that way from now on. My switch is inside the house so it is not subject to the constant change in temperature that quickly loosens most connections, however, before all of this I tried to unscrew...

Hi guys, Just wanted to let you know that this morning the channels came in fine, so I am not sure what swapping the 110 and 119 cables did but it worked for now. Any thoughts as to why that worked? I will let you know if the problem comes back. Thanks for all of your help.

Ok, I swapped ports 1 and 2. I will have to wait until tomorrow morning to see if that did anything. I also checked the ends and they all look fine. Here is something odd though, I get up at 7:00 am and that is when I notice the problem. This morning, however, I left it alone (I did not reset...

Hi Guys, I have a question on my DPP44 Ok, first here is my install, Dish 1000 with 119, 110, and 129, into DPP44 then 3 receivers, 625, 622, and 722. Now here is my problem, All has been fine for the past 9 months now every one or two days I will lose my signal on my (higher) channels...

Didn't find on SatelliteGuys but did a search on google for hdmi swivel Musicdirect - AUDIOQUEST - 90 DEGREE HDMI SWIVEL ADAPTER (EA)

Sorry to dig up my old thread, but I finally got all of my cables run and setup so I just wanted to let you know everything is working perfectly. You guys are the greatest, when I started this project I was a total noob but you guys were so helpful I don't know where I would be without you...

the everything pack, that would so rock. enter me please.

I can always use more space, enter me please.

enter me please

me please.

my roommate moved out with her xbox, I need one bad!!

Just to clarify, port 1 dpp twin ==> port 2 dpp44 port 2 dpp twin ==> port 1 dpp44 port 1 dp dual ==> port 3 dpp44 correct?

When I got my computer I looked into that as well but the only thing that I could find was for cable. There are companies out there that make pci cable card devices but as of yet there are no pci cards for satellite. Sorry. The best you can do is to input one of the outputs into your computer...

Just a few questions left. The new run that I make goes directly from the 129 W into the switch just like the 110 and the 119? I was reading that I need to do a software update in order for the receivers to work with the switch, is that correct and how do I complete that? When I put the...

I think that I know how to install this. I will try and put the picture in the post but if that doesn't work I will put it in an attachment I need to run another cable from the dish (in red), then install the dpp44 as displayed and then run a cable to my new 622 in the upper right and...