Search results for query: *

I just wanted to let you guys know that everything is working fine so far, hopefully it continues that way from now on. My switch is inside the house so it is not subject to the constant change in temperature that quickly loosens most connections, however, before all of this I tried to unscrew...

Hi guys, Just wanted to let you know that this morning the channels came in fine, so I am not sure what swapping the 110 and 119 cables did but it worked for now. Any thoughts as to why that worked? I will let you know if the problem comes back. Thanks for all of your help.

Ok, I swapped ports 1 and 2. I will have to wait until tomorrow morning to see if that did anything. I also checked the ends and they all look fine. Here is something odd though, I get up at 7:00 am and that is when I notice the problem. This morning, however, I left it alone (I did not reset...

Hi Guys, I have a question on my DPP44 Ok, first here is my install, Dish 1000 with 119, 110, and 129, into DPP44 then 3 receivers, 625, 622, and 722. Now here is my problem, All has been fine for the past 9 months now every one or two days I will lose my signal on my (higher) channels...

Didn't find on SatelliteGuys but did a search on google for hdmi swivel Musicdirect - AUDIOQUEST - 90 DEGREE HDMI SWIVEL ADAPTER (EA)

Sorry to dig up my old thread, but I finally got all of my cables run and setup so I just wanted to let you know everything is working perfectly. You guys are the greatest, when I started this project I was a total noob but you guys were so helpful I don't know where I would be without you...

the everything pack, that would so rock. enter me please.

I can always use more space, enter me please.

enter me please

me please.

my roommate moved out with her xbox, I need one bad!!

Just to clarify, port 1 dpp twin ==> port 2 dpp44 port 2 dpp twin ==> port 1 dpp44 port 1 dp dual ==> port 3 dpp44 correct?

When I got my computer I looked into that as well but the only thing that I could find was for cable. There are companies out there that make pci cable card devices but as of yet there are no pci cards for satellite. Sorry. The best you can do is to input one of the outputs into your computer...

Just a few questions left. The new run that I make goes directly from the 129 W into the switch just like the 110 and the 119? I was reading that I need to do a software update in order for the receivers to work with the switch, is that correct and how do I complete that? When I put the...

I think that I know how to install this. I will try and put the picture in the post but if that doesn't work I will put it in an attachment I need to run another cable from the dish (in red), then install the dpp44 as displayed and then run a cable to my new 622 in the upper right and...

OK, I did some more checking and please correct me if I am wrong. If I were to make one more run of cable from the dish 1000 then put all three into a dpp44 then because I would be using 2 - 622's and 1 - 625 then I can make just one cable connection to each receiver as long as I have a dpp...

I just went up on the roof to make sure. I have the dish 1000 with a DPP Twin and a seperate DP Dual lnbf. Because I have the 1000 why do I have to use the dpp44, why will the dp34 not work? If I were to change to the 1000.2 then you are saying that I can add one run of cable and then just...

So the 1000 has 2 seperate "blocks" while the 1000.2 has everything in one unit?

I will check tomorrow, what do I need to look for?

Sorry for the second reply but because I have HD and the 625 says DPP does that mean that I can only use the dpp44?

So even though I am getting info from 3 sats they can still run that through 2 cables?

I was also wondering what is the difference between the dp34 and the dpp44? When I got dish at first I didn't have HD but then when I added it the install guy came and changed something, did he install a different lnbf, I think that is what it is called.

Its dark outside right now so I am not sure what "model" the dish is. I do not see any switches where the cable comes into my house but I read that the switch could be installed outdoors so I cannot see any more tonight.

Hi, I am new to this so please give me a little leeway. I have 4 TVs in my house 2 are hooked directly to receivers and the other 2 are back fed from the receivers. I have a 625 and a 622 that gets HD for my plasma. Right now I have two cables coming into my house, let’s call them cable A and...