Recent content by m3repair

Just to let you know the DPP Quad that bell has works on both Bell's systems and Dish's Systems, the only difference is the DPP Quad is not identified in check switch as a DPP Quad it shows up as a LNB 2 Sat/w separator (if you have a separator connected) and "LNB 2 Sat" if you have a single...

The Purpose of this project is to reuse what I have, and not how to hack saw a version of the DP LNBF onto my dish, the dish itself requires the LNBF to me mounted close to the mount at the bottom, If I do what you told me to do I have a feeling and im pretty certain I am right about this one...

I wish I had access to an LNB like that, The other idea I had was to cut up a DTV LNB, flatten the edge of it with a grinder and then bolt it on, but it would be ideal if the proper feed-horn could be located. Thanks once again for all your replies! much appreciated

I in this case don't have any feedhirnss to play with, I would rather find the correct one of possible if the 105-110 old combo works :), did you have any luck looking ?

I want to do the opposite and use the DBS LNBF for 129 on a 30" dish with a round mount and reuse this LNBF, I have seen the mods for getting 118 from the 105 or 121 LNBF, but it would be fantastic if you could find it!, your efforts for looking are much appreciated, I know the kiddies have...

Another idea if someone has it is to find the old version of the 105-110 combo as originally they where separated as I recall, I have also added pictures to perhaps recall someones mind who may have one laying around that they can pass down perhaps?

Thanks Pepper for the quick reply, hmmm but doesn't that have a shaped horn inside the LNBF, If you do have it please do let me know via here or pm me, I had the idea that if its not round exactly inside that perhaps we can spin it round on a lathe? (EDIT: I understand what you mean pepper...

Thanks Iceberg for the reply, The sad part is I do not have the original horn from the 121 dish, It was scrapped a while back, I have been pondering if such a thing exists just for DBS though, the best I can come up with is the Eagle Aspen LNBF for direct-tv international but that is the wrong...

I have a bit of a project that his been on the back burner for awhile and I want to accomplish it before the snow starts to fall, I wanted to take a DBS Stacked LNB use it with a DPP44 and then add it to a 30" Satellite Dish, so I can pick up 129 a little better then my Dish 1000+ can, What I am...

Where did you get those waveguides from? I am on the hunt for one

EDIT: I stand corrected, it isn't a fuse it is a surge suppressor, and not a fuse, never replaced one or touched one personally so I wasn't entirely sure, To me it seemed like a newer style fuse more compact but again I stand corrected, Thanks!

All be critical about this "IF YOU DON'T KNOW WHAT YOU ARE DOING OR HAVE NO KNOWLEDGE OF ELECTRONICS AND THERE INTERNALS AND INTERNAL VOLTAGE, I HIGHLY DO NOT RECOMMEND OR CONDONE OPENING OR MODIFYING ANYTHING INSIDE" Now that this is out of the way, yes there is an internal fuse inside, its...

That is correct @Wase4711 I have done the complete power down and power on and tried multiple orders of what powers on first to get it to work and to no extent did anything work. Only solution for now is Component cables which is an "OK" solution for people who can get to there cables behind...

Just wanted to start a new thread on just this one issue, The issue is when TV1 is off or your TV set is not compliant with HDCP does it affect your TV2 output saying that you need HDCP ? I have been reading other threads about the issue and am I getting mixed findings so I would like first hand...

@wase4711 Well your lucky as it at least works for you, for me it hasn't worked at all, so once can only hope its a software issue and I am pretty certain it is, one can only wait it out, more of an issue is the TV2 freaking out that it needs HDCP on TV1 which is the biggest headache that needs...