Recent content by metal head

  1. M

    99W ku TP 12040

    Thanks fot the quick reply.
  2. M

    99W ku TP 12040

    Is that tp still active? I used to get two channels there but now no signal. Thanks
  3. M

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Is there a step by step guide to get a link into the iptv channels. An detailed guide Right from finding a link to actually installing it. Thanks
  4. M

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Where is the best place to download these add ons? Thanks.
  5. M

    Galaxy 19 97w

    Anyone experiencing breakup on this satellite tonight. Signal is good but channels pixeling.
  6. M

    87w ku 11800

    Thanks for a quick reply. I tried those settings with this lnb and it's not giving me any quality on my tps that I know work with my digiwave lnb. I guess I'm back to my old lnb.
  7. M

    87w ku 11800

    I went and bought a new LNB. Its a avenger PLL321S-2. I was hoping that was the trouble but everything is worse with that LNB. I tried every lnb setting that it could be but nothing. On the box it says L.O Freq: 9.750 & 10.600 Ghz. I tried standard, universal, 10750 and one of my receivers even...
  8. M

    87w ku 11800

    It's a 33" with a digiwave 990 linear lnb. Used to get 80's before but now nothing.
  9. M

    87w ku 11800

    Just tried tweeking the dish, Didn't make any difference. Quality is gone on My best TP while the others weren't affected. Any ideas?
  10. M

    87w ku 11800

    Must be something on my end. Gonna check today. Other tps seem fine, strange.
  11. M

    87w ku 11800

    Anybody experiencing breakup in The Patient Channel tonight? Usually my strongest TP.
  12. M

    Geosat MicroHd

    Thanks guys for helping me figure out this problem. The receiver is being replaced. Well pleased with the service.
  13. M

    Geosat MicroHd

    Confirmed the voltage out the back of receiver, it's 10.8 to 10.9.
  14. M

    Geosat MicroHd

    I don't have a switch in the pic with no signal because when I took it I had the receiver hooked up straight to make sure it's not a switch problem. I'll check the voltage at the receiver to make sure but when I tested the voltage at the dish today I also put a new piece of coax on the micro and...
  15. M

    Geosat MicroHd

    Lnb is connected, she will not show signal or quality on that tp. If I unhook the micro and hook up any of my other 6 receivers, no problems at all.