Recent content by OrbyTV-ITK

I literally built and operated the Orby TV EPG system. I did the deal for the data. I architected the data playout to get 14 days of data for 8000+ local stations in 2mb/s. So tell me again how wrong I am

We've had the OTA EPG data on the satellite since launch. We carry EPG for all the full power and Class A stations where we can get data. It's not limited to regions or markets. It works out to be about 8000 channels of data.

Most local channels will have EPG data provided by our satellite EPG feed. If we don't have the data then the PSIP data for the station will be used instead.

Yes! Use a splitter that passes power on all ports and is rated from 5-2500Mhz.

Here are some answers to questions I have seen posted on the forum more than a few times 1/ LNB and the 22kHz tone The current Orby TV LNB is capable of using two different LO settings. Setting the 22kHz tone on drives the Orby TV LNB to the correct frequency range for our current...

For those of you interested in learning some more about the Orby TV uplink you can read the following story https://www.broadcastingcable.com/post-type-the-wire/satellite-tv-pay-fiber - Mark

Hi Adam. The 22kHz tone needs to be set ON.

Hi Mister B, you do not need to set up an account before pointing the dish. Once you have the signal all set up you can go ahead and sign up then for programming. Mark

A professional install is by far the best solution for most Orby TV customers. But, we've heard from a lot of people who are capable of installing the Orby TV outdoor equipment themselves. Starting today the Orby TV Self Installation Kit is available for purchase on our website. More details...

You can record two and watch either one of the two channels or a previously recorded program.

First post! Thanks to all of you for your interest in Orby TV. The Orby TV DVR does have the ability to record two programs at the same time. Those two programs can be any combination of satellite or OTA ( 2 satellite, 2 OTA or 1 of each ).