Recent content by Phoxx

I'm a little confused by this thread. If the new owners of AZBox don't want Rick as a dealer, I guess they just won't sell him anymore merchandise. Case closed! AZBox.ca/us should not be involved in this situation, as they are not the manufacturer, they do not grant exclusive right to sell...

I owned a 6' aluminum a long time ago. They were made in Richland Center, WI, about 60 miles from me. They were a good dish. Later they made KTI Brand there, also a good general service dish.

I lost the COZI feed on 105w just before Noon (CDT). Plenty of signal, but just black screen. They change PIDS or something? I'm using an AZBox Premium+ with a 10ft dish, signal quality 85%.

The dishes are probably different, the old Ku was off-set, the new C-band is direct feed. This means you elevation is going to be different. You will also need to be concerned with skew/declination. The old motor accounted for this automatically, the new mount does not, you need to set it. I...

I know where you can get the latest factory file for the CW-800, if you'll PM me. However, I don't think you need a new file, the one you have should be perfect for true FTA. No hacking is done at this site, but that does not mean you can't use hacker files as most times they are the most up to...

Since you do not have a signal reading, you are not communicating with you LNB. Some suggestions: Check cabling, be sure connectors are tight and making good contact. Check your settings on the AZ Box, especially, the frequency. Be sure you tuner is seated properly. If still no results give more...

Thanks for the input, however, I've already sold the tuner to someone in Europe. Now I wish I still had it to give your suggestion a try. Thanks for the info vc2. Appreciate your help.

My vote goes to the Kual-tronics dish since RGK is only a few miles from the plant where the dish was made--Richland Center, WI. Nice dish, grab it or let me know and I'll get it.

I want my microHD

Here's a 3-meter Design Homes Satellite dish. I had one just like it in 1988, Spun aluminum, deep dish. Great for in-town reception.

Just a quick thought. The 4510L allows up to 5 devices at a time. Are you topped out???

Here is the formula to determine the F/D. You may also be a tiny bit off south, turn your dish on your mounting pole a tiny bit east/west and check your signal strength.

To find out if you have a "live" LNB, hook it to your receiver, if you get a "signal" reading then your receiver is communicating with your LNB. If you have no signal reading at all, and you are sure your switches/wiring are OK, then chances are you have a bad LNB. To see if your LNB is...

If you push the "EXIT" button on your remote that will remove the message from the screen.

There is a guy over by Martelle, IA (NR0X) who has an 8ft fiberglass you can probably get for little or nothing.