Recent content by sgt940

I loss about half of the channels on 110 this morning. After rebooting etc. we finally get a message on those channels, IFC and several others that Dish has a problem and are working on it.

Used to be an advid user on here but haven't had a need lately. I do have a question I have started having pixelization issues on multiple channels including prime channels. Checked my signal strength on 110, 119, 129 across all satellites across all channels across all tuners waiting a couple...

To give everyone an update as I started this thread with harddrives showing not content. Bought a new HD same problem, got them to replace the Hopper and what do you know all three of my harddrives work perfectly. Was the Hopper all along.

By the way the USB sticks are recognized just like the hard drives but like the hard drives show know content when you click on them in the DVR menu

The other thing I would add to the 3 hard drives not showing content but being recognized is I have 3 USB 8 gig sticks that I have used for 2 years, I know they are not supported but truth is they have always worked flawlessly better than the expensive WD external actually, so that it is 6...

My issue is a bit different, all three of my drives are WD, external drives with their own plug in power. All have worked flawlessly for over a year, I leave 2 plugged in all the time. These drives ARE RECOGNIZED by the hopper, when you plug them in you immediately get the message and they show...

Spent 2 hours on the phone, first lady was power fail etc. ask for advance technical support and I could tell from the back ground noise they simply transferred me to someone else in the Philippines call center. Same run around told me they would turn it over to engineering and at some point...

I should add tried all 3 USB ports, same on all three

I have 4 EHDs that I have used flawlessly on multiple receivers, including the Hopper 3 which I have had about a year. Today the one I had plugged when you hit the DVR button it shows the drive however when you click on it there is not content, no empty boxes nothing, this was working yesterday...

I just upgraded my hopper 2 to hopper 3. So far love it. One exception on the 40.0 remote I had 4 learned codes that would allow me power up everything and do a couple of tv functions. The 54.0 shows it learns the codes but they do not work. Tried TV codes, amplifier codes, different buttons...

I have started to notice a difference between the audio volume levels between tuner 1 and 2 on my 922. You can set both tuners to the same channel and hit the swap button, significant difference in volume level. Anyone else ever seen this. Had the 922 for a couple of years and recently swicthed...

That worked perfect, Thank You, 4 up, nudged it east, was one sat off

adding a deck and moved my dish 1000.2 I aligned to 119 using foil over 110 and 129. I get 61 on 129 and 78 on 119 and all channels are fine on these 2 sats but I get wrong sat on 110 it says it is wrong sat and 129 and it is the exact same signal strength as 129 but in red of course. I reset...

For me it is simple, I upgraded from a 622 thinking I was getting a more advanced reciever. Stability is terrible, key features the 622/722K had do not exst. The reciever has been out over one year and these are not fixed. I will wait for the next software and than move back to the 722K or...

I have a 722 and 2-612's all three have great HD picture quality and I also have a 1000.4 dish. I also have a great outside antenna and yes the over the air quaility for locals is definetly better than the local Dish re-broadcasts, at least in Dallas. If you have the ability to hook up an...