Recent content by tacafta

What your think? Should I load the original factory firmware ?? The receiver have a version from 2007 and I check the neusat webpage and the factory firmware is from 2006.

I buy a new , Neusat SP6000 premium , and works fine, I use it for true FTA. But I saw that in the EPG have an option to download EPG and when I select that show Dish and Bell EPG download options. Now, thats normal ?? The receiver came like that I had not add anything.

I see on Lyngsat the 40.5 W sat. said band Hemi (I dont know what meams but...) then I look the map and my area have a dish size that fit my one (at 47 inches). If that possible ? What type of LNB is that one "Hemi"?

I get Hispasat. Its was that I didn't understand the functions of my receiver . But now if more easy to get the signals. One question: If I don't get all the channels from the sat. What would be happening?? What I have to change or adjust??

Its normal , don't get some channels ? By example I am on the 97 W and I receive like more than 100 true FTA , but I dont receive the Aljazeera Sport . Even I receive from the same TP freq. I receive other channels except that one. Its normal or I have to change something??

Yes, Thanks! I skew at 2 o'clock like you said and get almost all the channels (like 160 FTA) . Now the mission is the Hispasat that its very difficult to get . I didn't find that signal I am thinking in buy a satfinder because my receiver is not too friendly looking for signals. By example I...

Thanks Iceberg no motorized dish. I move the dish to magnetic azimuth and I get the 97W (Thanks again LaK7) . But I can get vertical TP . I get 20 true FTA channels only . I made a blind scan but no add mores. What is happening with the verticals TP?

thanks , First I didn't use the magnetic , I didn't know it. yes I am in Puerto Rico in Caguas. I said is that I am looking for the 30.0 W and 97.0 W Satellites. I will check ....

My First FTA , I cant get it I bought an LNB DMS Standard 0.3 dB and bought the receiver neusat sp 6000p. I use a Dtv old dish of 47'' . Now the thing is that I dont get the Hispasat or the 97W . I really dont understand well the receiver . First dont have the Hispasat , I have to add it...

]I have a Dtv dish of 47'' , and I want to get the Galaxy 19 at 97°W . I am in PR. Could be possible??

For get Hispasat here in PR . Do this (JSC321S Standard Ku 0.3dB Single LNB) will get that satellite and give me good stability signal?? Here some spec.: JSC321S Specifications Input frequency range 11.7~12.2 GHz Output frequency range 950~1450 MHz LO...

Asking for a review of the LNBL, JSC321S Standard Ku 0.3dB Single LNB?

I only need one with single output so ... What other more lower priced than Techsat Tracker II+ , But Good also ?? Just for have options

Thanks guapoharry , Now thats my next question , In what things I have to put attention for decide what LNBL to buy ? Because I see some with lower dB (like 0.2 ,0.3 ) with lower prices but other are much hight priced and the dB are similar or 0.4 dB. Under lower budget: By what factor I...

And what do you know about the Mvide FS 4000?? Good for FTA?? How I decide what LNB noise figure is better for my place or my dish ??