Recent content by umass03

What type of splitter would I need? In-wall coax feeds a diplexer which has coax to the TV and the other connection on the diplexer has the antenna dongle for the remote.

Ok, so I have been reading a bunch of different threads on recievers, OTA, etc.. but there is a lot of jargon I just don't understand so my question is... The 322 is in an upstairs bedroom (TV1) with TV2 in an office downstairs. I watch more in the office so I'm thinking if I put the 322 in...

The reciever is set to channel 75 for the TV2. On the actual TV it is tuned to channel 26 for the DISH Network feed. The TVs built in tuner does get a few HD locals but when I hook up an external antenna I can get the other locals in my area in HD as well.

Thanks. I'll try it out. My TV2 channel is 75 (26) on the tv itself which is not one of my local OTAs

I'm kind of new to OTA so if this has been asked before I apologize. Can I hook an OTA to the diplexer (I think that is what it is called) for TV2. How its hooked now in case I'm using wrong terminology is the TV2 is fed via in house coax. There is an adapter with the coax coming in and then...

Got it! Thanks to all who chimed in!

Looks like I forgot to say, that both recievers are set so that their respective TV2s are set to channel 75, so how am I receiving the signals if the TVs themselves r on 24?

So since I'm not able to lease another reciever since I "upgraded" when we added a SD reciever I figured I'd just change the config of the setup so my main 622 would still feed the fam room and the TV2 would switch to my office so I could get the dvr access for sports. Anyway, going through...

Well, the 622 is hooked to the family room tv with the TV2 to a bedroom upstairs. I want to switch that TV2 to a TV that is in a different room.

Anyone know of a link to the 622 manual? All the ones that I have found, including DISH's own, does not include Chapter 12 which is the chapter I'm looking for. What I am looking to do is change the room that uses the TV 2 since DISH said "hell no" to me getting another HD reciever

Sorry if I am making this harder then it needs to be but would I have to make the change to the box outside the house? Both coax in the current setup run from wall jacks

So on the SD setup the reciever is in the bedroom so I would put the HD box in the office and use the antenna adapter in the office for the line in the bedroom where the SD box used to be?

In my current setup I have a 622 in the family room which also feeds the master. I also have an SD reciever in one bedroom which also feeds a tv in my office. Can I add an HD reciever to the office without having to change the rest of the setup? I guess I'm asking is adding the new...

Thanks for all the input. There was no snow on either DISH but I did find a small layer of ice so I got that off and everything is back to normal. Guess I was just assuming snow would be the issue

I live in Coeur d'Alene, ID and we are having another snowstorm and once again I've lost my signal for my SD and HD (two dish set-up). Technical support says clear the snow off it, great excpet their isn't any snow on it. Is there something else that can cause this to happen? I have dealt with...