Recent content by uvbnhd

Hi can you clarify something. when i have the meter on the LNB i can hit vertical signal but i have to rotate the LNB to hit the Horizontal on the same transponder. So when i do a blind scan on my reciever is it going to pick up both or am i limmited to just vertical or horizontal. Also i was...

Hi i did try hitting 3820 on the Lnb with the meter and i had a very strong lock. Making some progress. After resetting my reciever i was able to hit some channels on my reciever but only a few and i am getting anything to come in on the channels.

Had ku setup on dish worked good setup C band and am getting great lock on sat 91w with a FS-1 Meter but am not hitting any channels on my SV8000HD. I made sure when looking at the front of the LNB the Vertical was at the bottom say at 6 O’clock and HOR on the left at 9 when I first started...

Will do

I tried this but i am having a problem. I am using Sv8000hd sometimes when i push the PID button a box comes up and i can enter the PID numbers then the next time i push it my whole reciever reboots. Also when i do enter them i save it and go back and The PID numbers Have not been saved the...

Sorry should have put that in there i am using a Sv8000HD.

wonder if you could help with another problem. I have my c band setup and am getting a great lock on sat 91w on my first strike meter but when i scan for channels i am getting no channels. I thought it could be the diseqc switch so i connected it straight to the reciever and still cant hit any...

hi i just bought the dmx242 can you tell me if i use the Dielectric plate does that allow me to get both linier and circular or does it switch it to circular only. Thanks

Hey does any one now what to set the dmx242 to on your reciever is it single or legacy quad.

sorry the boot loader is 2.07 the main software was 4.16 when it happened and then i upgraded to 4.43. So are you saying the 4.43 is pirated that would stink im not tring to use anything pirated. Although with the 4.16 i was not able to get channels ABC or CBS on my High Def Antenna, once i...

Sorry Guys for not responding sooner and i didnt mean to get this whole discussion going. Just to let you know once i set it to 10600 and 22khz ON i was able to look on some sats. Thanks

Hey have similar problem. I did a blind scan on 85w on Tuesday night I only got 2 channels one had nothing and the other had a signal of 100 % and color bars. The problem is once I went to the channel I could not get off the channel. It had a loud tone and I could pull up menus but no mater what...

Hi everyone I am brand new to FTA but thought I would give it a try. I am having an issue. I am using a SNH-031 Invacom universal single KU LNB I have it setup on a DirecTV 33in by 22in dish. I am planning on getting a bigger dish but since this was already setup I am using it to just try and...