Recent content by viewsonic

  1. V

    Very Strange Problem with signal

    I have the twin Legacy LNBF. The problem happens on all the channels. I updated the software. I think that the connectors are OK, since the signal strength (when it works) is above 120. I do have a connector in the line (where I can hook analog satellite finder). I do not know why the...
  2. V

    Very Strange Problem with signal

  3. V

    Very Strange Problem with signal

    There is no tree. Clear line of sight. No wind today it had lost signal for a day. :cool:
  4. V

    Very Strange Problem with signal

    Hi: I have a strange problem. My signal strength (when it catches the bird 61.5W) is 122-124. However it loses signal every 10-15 minutes and the progress goes only to step 1 of 5 and signal comes back. It never completes all the steps. Driving crazy :confused: What is going on? :no
  5. V

    Lost Signal 61.5W, Signal Bar Green....

    Thanks to all of you for your comments! Unplugged power to the unit, and after 3 hours signal strength was 124. Do not know what happened, but working now, until next time. :D
  6. V

    Lost Signal 61.5W, Signal Bar Green....

    Thanks! #1. I was wrong. I have the twin LNB. Just like in the picture. Now it has an internal switch. How does that effect me? Do I have to do any switch test/ before or after alignment of the dish? #2. I connect the RG6 to the Left LNDF? where it says 119w. Does it matter where I...
  7. V

    Lost Signal 61.5W, Signal Bar Green....

    The reciver is 3900.
  8. V

    Lost Signal 61.5W, Signal Bar Green....

    Hi SimpleSimon: This is what I have (I am no expert), but will try to give you all the correct info. I have one Dish 500 with one arm supporting 2 LNBs (says Dish network Digital. I think a dual, twin will have 2 arms?). One side is 119W and the other says 100w (outside the grey plastic)...
  9. V

    Lost Signal 61.5W, Signal Bar Green....

    Thanks Folks! I mean 61.5w for dish network (Echostar 3 at 61.5). I was getting 109-112 signal strength before losing it. I have dual LNBs, 119w and 110w. I am using only 1 LNB and have no switch or other D500 or dish attached. I think I am going to go to kitchen and use the aluminum foil...
  10. V

    Lost Signal 61.5W, Signal Bar Green....

    Hi Readers: I lost my dish 500 signal to 61.5W. I peaked the "signal/direction" using analog satellite finder several times, but still cannot lock the satellite. The receiver keeps on saying “acquiring satellite signal” (satellite default). When I go in menu to ……system...
  11. V

    Gmail

    Can I have one Hi: I do not want to start a Gmail request chain. But, If you have another invite, can I get it from you. Thanks Viewsonic
  12. V

    Dishnetwork 61.5W and 148W help.

    Thanks a lot folks! I bought compass, and a level and then cought the 148W in 15 minutes. Signal strength is @75-80. :D Now one easy question..... I have hooked cable and dish to the receiver and output to 1 tv in 1 bedroom. I want to get the output across to another bedroom's TV (has...
  13. V

    Dishnetwork 61.5W and 148W help.

    Thanks folks: Thanks Iceburg: I overlooked may be the international programming is also available at 121. Here is the link www.dishnetwork.com/content/programming/channels/indexpackage.asp?NetwID=50519 . However, here it says different...
  14. V

    Dishnetwork 61.5W and 148W help.

    Thanks Iceburb for deleting duplicate post. Any suggestions please!
  15. V

    Dishnetwork 61.5W and 148W help.

    Sorry wrong forum. Can admn. delete this post? Hi Kind Folks: I need help installing a dishnetwork dish 500 with two LNBFs. I started yesterday with cable hooked to 119 LNBF, and when I was adjusting I was able to get both Satellite 119 and 110. However I could not get 61.5W (guess I have...
See more
Top
Back