Recent content by wa1mtz

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. W

    800 series pvr

    It didn't seem to work, unless I'm not doing it properly, system status, scolled down to the listed V code, click on it (expecting it to allow a change) nothing happens V=64.29
  2. W

    800 series pvr

  3. W

    how to change the V code?

    I have a virgin shaw 830 pvr, the only channel that sows a signal is 212, firmware version is 64.29, in options, system status, signal is 64 max, on the 'bars' it jumps up & down 0-28. I even hooked it up to my 6' dish, signal no better than the 75cm with the xku lnb, analoue signal meter sez...
  4. W

    800 series pvr

    thank you, I'll have to try it this week
  5. W

    800 series pvr

    anyone know of any problems with weak signal with this box? new, mfg date 2016, signal very erratic when trying to set it up, bars go up & down. Go down the menu to db signal and almost non exeistant on f2, other sats show -2db ? box never authorised. ch set to 350
  6. W

    Shaw Satellite Finder

    I have the 800 pvr and the new 75 dish, can't get a signal from the shaw satt. but get strong signals from other satts (there was a small crack in the plastic on the right showing what appears to be aluminum foil on the surface but not all the way thru, it is about 3 " long, I put cement over it...
  7. W

    Shaw satellite

    I'm in w. mass, can't get a signal with the 75 cm dish, but I can with my old prime focus, but the new rcvr doesn't power the old corotator what kind of system are you using? thanks
  8. W

    Shaw Satellite Finder

    I'm at 42.3..............
  9. W

    Shaw Satellite Finder

    Hmm, well when I checked lyngsat, it shows me to be on the edge of the spot beam, and it also shows that a 90cm or larger dish is needed. Is there anyone in mass or ct/or south that is still getting a signal as of this past December?? thank you
  10. W

    Shaw Satellite Finder

    not sure how to post a new message on this site. Q: can shaw be rcvd in wmass/ct. with a stock 75cm dish with the stock quad lnb? wa1mtz
  11. W

    Shaw Satellite Finder

    This is in jan 2020, I can rx where the old stuff went away, I assume it was A2, at least thats what it was on the old 921 rcvr. hooking up the new rx, I get signal, but it isn't authorised as I don't have a newer type lnb on the old 1.9m dish. I got the new 75cm dish with the new lnb, I can't...
  12. W

    Shaw Satellite Finder

    I'm new here, can't figure out how to post a message, so, I'm replying to you. I need to know if there is anyone in wmass/ct that can rx F1 ? on a 75cm dish? I had no problems with the old 1.9m prime focus, wa1mtz
See more
Top
Back