Recent content by White Cobra

Update Update: I checked the reed sensor as instructed and it is good. I checked the wires for continuance and wires are good. I have a VBOX that I was not using so I decided to test that. Once sat positions were stored, it is working like it should! The problem is in the Uniden UST300...

OK, I will give that a try tomorrow. I just took reed sensor out and re soldered the connections and that didn't work. I will also twist the 2 wires for it together at dish and check for continuance at the positioner.

I have a 10' Ku mesh dish and I have only a QPH-031 LNB mounted on it and I love the way it works. I removed the c-band feed horn, the took the plastic case of the Invacom apart(voids warranty), worked 1/2 of case and metal part of LNB and worked through hole in the scalar ring, then worked...

A few days ago we had a bad storm and I lost power for 8-9 hours. Today I turned on my Uniden UST300 stand alone positioner and all stored sat positions were gone! Using remote , I have manually moved dish and stored 3 sat positions. When I try to chose a sat, I get a actuator error and the...

Old 10'dish,new actuator, new mover. Getting actuator error. Been moving dish /w a car battery. Motor has 5 terminals,1(green) & 2(red)(heavy guage) for motor. 3 has (heavy guage)(white) looped from motor to limit switch, 4(small gray), and 5(small black). New ribbon cable has 2 (heavy guage)...

Trying to figure out how to program a Coolsat 4000 Pro to operate a HH120 motor. I have followed all instruction for installing motor and dish that came with the Fortec Star 100 cm dish package, but Coolsat has no instruction for using a motor. I contacted retailer for Coolsat, still waiting for...